Ariston Aqualtis AQ7L 093 X: Care and maintenance

Cutting off the water and electricity

To access the pre-chamber:

EN

supplies

• Turnoffthewatertapaftereverywashcycle.Thiswill

limit wear on the hydraulic system in the machine and

help to prevent leaks.

• Unplugtheappliancewhencleaningitandduringall

maintenance work.

Cleaning the machine

1. take off the cover panel on the front of the machine by

The outer parts and rubber components of the appliance

first pressing it in the centre and then pushing downwards

can be cleaned using a soft cloth soaked in lukewarm

on both sides until you can remove it (see figures);

soapy water. Do not use solvents or abrasives.

2. position a container so that

it will collect the water which

Cleaning the detergent dispenser

flows out (approximately 1.5 l)

drawer

(see figure);

3. unscrew the lid by rotating

To remove the drawer, press

it in an anti-clockwise

lever (1) and pull the drawer

direction (see figure);

outwards (2) (see figure).

Wash it under running water;

this procedure should be

repeated frequently.

4. clean the inside thoroughly;

5. screw the lid back on;

6. reposition the panel, making sure the hooks are securely

in place before you push it onto the appliance.

Caring for your appliance drum

Checking the water inlet hose

• Alwaysleavethedoorajartopreventunpleasantodours

Check the inlet hose at least once a year. If there are any

from forming.

cracks, it should be replaced immediately: during the wash

cycles, water pressure is very strong and a cracked hose

could easily split open.

Cleaning the pump

The washing machine is fitted with a self-cleaning pump

which does not require any maintenance. Sometimes,

small items (such as coins or buttons) may fall into the

protective pre-chamber at the base of the pump.

Make sure the wash cycle has finished and unplug the

appliance.

10

Care and maintenance