Sony CDX-2500R: Troubleshooting guide General CD playback

Troubleshooting guide General CD playback: Sony CDX-2500R

Troubleshooting guide

The following checklist will help you remedy the problems you may encounter with your unit.

Before going through the checklist below, check the connection and operating procedures.

General

Problem

Cause/Solution

No sound.

Cancel the ATT function.

Set the fader control to the centre position for two-speaker

systems.

Rotate the dial in a clockwise direction to adjust the volume.

The contents of the memory

• The power cord or battery has been disconnected.

have been erased.

• The reset button has been pressed.

n Store again into the memory.

Indications do not appear in

Remove the front panel and clean the connectors. See “Cleaning

the display.

the connectors” (page 20) for details.

No beep sound.

The beep sound is canceled (page 18).

CD playback

Problem

Cause/Solution

A disc cannot be loaded.

Another CD is already loaded.

The CD is forcibly inserted upside down or in the wrong way

(MD).

Playback does not begin.

Dirty CD.

A disc is automatically ejected.

The ambient temperature exceeds 50°C.

CD will not eject.

Press 6 for two seconds.

The operation buttons do not

Press the reset button.

function.

The sound skips due to

• The unit is installed at an angle of more than 60°.

vibration.

• The unit is not installed in a sturdy part of the car.

continue to next page n

23