Sony CDX-2500R: Maintenance Dismounting the unit

Maintenance Dismounting the unit: Sony CDX-2500R

Maintenance

Dismounting the unit

Fuse replacement

When replacing the fuse, be sure to use one

matching the amperage rating stated on the

original fuse. If the fuse blows, check the

Release key

power connection and replace the fuse. If the

(supplied)

fuse blows again after replacement, there may

be an internal malfunction. In such a case,

µ

consult your nearest Sony dealer.

Fuse (10 A)

µ

Warning

Never use a fuse with an amperage rating

exceeding the one supplied with the unit as

µ

this could damage the unit.

Pull the unit out while the release key is inserted.

Cleaning the connectors

The unit may not function properly if the

connectors between the unit and the front

panel are not clean. In order to prevent this,

open the front panel by pressing (RELEASE),

then detach it and clean the connectors with a

cotton swab dipped in alcohol. Do not apply

too much force. Otherwise, the connectors may

be damaged.

Main unit

Back of the front panel

Notes

For safety, turn off the engine before cleaning

the connectors and remove the key from the

ignition switch.

Never touch the connectors directly with your

fingers or any metal device.

21