Whirlpool AWG 218: INSTALLATION

ADJUSTMENT OF FEET

•

Do not install your machine on rugs or similar surfaces.

•

For your machine to work silently and without vibrations, it should be

settled on a flat, non-slippery and tough surface.

•

You can adjust the balance of your machine from its feet.

•

First, loosen the plastic adjustment nut.

•

Adjust by rotating the feet upwards or downwards.

•

After balance has been achieved, tighten the plastic adjustment nut

again by rotating it upwards.

•

Never put cartons, wooden blocks or similar materials under the

machine to adjust the levelness of the machine with the ground.

ELECTRICAL CONNECTION

•

Your washing machine works with 220-240V and 50Hz.

•

A special grounded plug has been attached to the network cable of

your washing machine. This plug must be inserted to a grounded 10

amp socket. The currency rating of the attached electricity supply

should also be 10 amps. If you have no such sockets and fuses in

your house, the plug should be fitted by a qualified electrician.

•

Our company will not be held liable for any damage that may

occur as a result of usage without grounding.

WATER SUPPLY CONNECTION

•

Depending on the specifications of your machine, it may be provided

with a single water inlet (cold) or double water inlet (cold/hot). The

white headed hose is for the cold water inlet and red headed hose is

for the hot water inlet (for machines with hot & cold water inlet).

•

To prevent leakage from the connection joints, 1 (valid for cold water

inlet) or 2 (valid for machines with hot & cold water inlet) seals are

included in the hose packaging. Fit these seals at the end of water

inlet hoses on the tap side.

•

Connect the white headed hose to the water inlet valve with white

filter and connect the red headed hose to the water inlet valve with

red filter (latter in the case of machines with hot & cold water inlet).

Manually tighten the connection parts. Please call a qualified plumber

for safer connections.

23