Fagor B-850A: 1. DESCRIPTION OF THE BLENDER (Fig. 1)

7

1. DESCRIPTION OF THE BLENDER  (Fig. 1)

1.

 On/off 

switch

2.

 Motor 

casing 

3.

 Mixer 

base

4.

 Blade

5.

 Plug 

cable

6.

 Speed 

control

7.

 Whisk 

coupling

8.

 Whisk

9.

 Chopper 

lid

10.

 Chopper bowl

11.

 Chopper blade

12.

 Graduated jug

13.

 Multi-purpose jug lid

14. 

Multi-purpose bowl lid

2. TECHNICAL DATA

B-850A: 

800 W

Voltage: 

220-240V~50/60Hz

3. SAFETY WARNINGS • 

Please read this manual carefully 

before using the blender for the first 

time and keep it handy for any later 

consultation. This will ensure that 

you obtain the best results with the 

maximum safety.

• 

Before using the blender check that 

the mains voltage is the same as that 

shown on the blender.

• 

If the electricity socket and the blender 

plug are incompatible, change the 

socket for a suitable one by contracting 

a professionally qualified electrician.

• 

We do not advise you to use adapters, 

plugs or extension cables. If such a 

device is indispensable, use only single 

or multiple adapters and extension 

cables that comply with current safety 

standards, taking care not to surpass 

the capacity shown on the adapter and/

or the extension cable. 

• 

After unpacking, check that the blender 

is in a perfect condition; if in doubt, 

contact the nearest Service Centre.

• 

The packaging (plastic bags, 

polystyrene foam, etc.) should not be 

left within reach of children, as it is a 

potential source of danger.

• 

This blender should be employed solely 

for domestic use. Use for any other 

purpose is considered inadequate and 

dangerous.

• 

In the event of the blender breaking 

down or malfunctioning, switch it off 

and do not attempt to repair it.

• 

If the blender needs repairing, only 

use a Service Centre authorised by the 

manufacturer and request that original 

spares are used. If this advice is not 

followed, the safety of the blender may 

be compromised.

• 

Do not change the cable. If it is broken 

or needs to be changed, contact a 

Service Centre authorised by the 

manufacturer. Do not use the blender 

when the cable or plug is damaged.

• 

The manufacturer will not be liable 

for any damage that may arise from 

inappropriate, erroneous or improper 

use or from repairs carried out by 

unqualified persons.

When using any electrical appliance, 

certain fundamental rules must be 

followed.

ESPECIALLY

•  Do not touch or pull the cable with wet 

or damp hands or feet.

• 

To prevent electric shocks, do not 

immerse the appliance or the cable or 

the plug in water or put it under the tap.

• 

Do not touch the blade whilst the 

blender is in operation.

• 

The whisk should be fitted or removed 

only when the appliance is unplugged.

• 

Do not allow the cable to hang over the 

edge of a table or work-surface or to 

come into contact with hot surfaces.

• 

Do not pull the cable to unplug the 

appliance.

• 

Unplug the blender when it is not in 

use, before fitting or removing the mixer 

base and before cleaning it.

• 

Do not allow children to use the 

appliance.

EN