Fagor B-850A: •

NOTE: 

Do not use the blender with food at 

temperatures exceeding 100ºC.

Operating the whisk

Push the whisk into the blender coupling 

until it locks 

(Fig. 4)

. Afterwards, connect 

it to the body of the blender 

(Fig. 5)

. Place 

the blender in the container, connect the 

plug to the mains and push the on/off 

switch to begin beating. Use the speed 

control to select the speed.

You may use the jug 

(12)

 or another 

container for whisking. The contents of the 

bowl can be stored using the corresponding 

lid. 

NOTE: 

Do not use the whisk with food at 

temperatures exceeding 80ºC.

Operating the chopper

The chopper may be used with dried fruits, 

herbs, hard-boiled eggs, dry bread, etc.

Fit the chopper blade 

(11) 

on the bowl’s 

shaft. Place the ingredients to be chopped 

into the chopping bowl.

Fit the chopper lid

 (9) 

onto the bowl, 

turning it anticlockwise 

(Fig. 3)

.

Fit the motor body

 (2) 

onto the chopper lid 

(9) 

turning it anticlockwise until it fits firmly 

into place 

(Fig. 3)

.

Insert the plug into a mains socket and 

push the on/off switch. Use the speed 

control 

(6)

 to select a speed. Once you 

have finished chopping, make sure that 

you remove the blade from the bowl before 

emptying out the contents. 

Once you have finished chopping, you can 

store the contents of the bowl by using 

the multi-purpose bowl lid

 (14)

 to seal it 

hermetically.

NOTE: 

Do not use the chopper with food 

at temperatures exceeding 80ºC.

Wall mounting

Disconnect the blender and unplug it 

from the mains before carrying out any 

maintenance or cleaning. Wash all the 

accessories immediately after use in order 

to prolong their useful life. Take care when 

handling the blades, as they are very sharp 

and keep them out of the reach of children. 

The bowls

 (10 and 12)

 and the egg whisk 

(8) 

are dishwasher safe. The remaining 

8

• 

Before connecting the blender, ensure 

that the mixer base is correctly fitted to 

the appliance.

• 

Do not use or place any part of the 

blender on or near to hot surfaces (gas 

or electric hotplates or ovens).  

• 

This appliance should not be used 

by physically, sensorially or mentally 

handicapped people or people without 

experience or knowledge of it (including 

children), unless they are supervised or 

instructed in the use of the appliance by 

a person responsible for their safety.

• 

Children should be watched to ensure 

they do not play with the appliance.

• 

For greater protection, we recommend 

installing a residual current device (RCD) 

with an operational residual current not 

exceeding 30 mA. Ask your installer for 

advice.

4. OPERATION

Preparing for use

This blender is designed to process small 

quantities of foodstuff and should not be 

used for any other purpose. 

Before using for the first time, clean the 

casing of the motor with a damp cloth. 

Wash the shaft and the blade in hot, soapy 

water; do not immerse the upper part of 

the shaft. Dry all the pieces thoroughly. 

IMPORTANT: 

Before fitting or removing 

any of the parts of this blender, unplug it 

from the mains.

Operating the blender

The blender is suitable for processing 

light foodstuffs, such as preparing sauces, 

soups, mayonnaise or purées.

Fit the accessory that you are going to use 

to the motor casing, turning it in an anti-

clockwise direction until it is properly and 

securely fitted. 

Once the mixer base is fitted 

(3)

, plug the 

blender into the mains. Place the food to 

be processed in a suitable container and 

place the blender in the position shown in 

Figure 2

. Select the speed by turning the 

speed control 

(6)

. Then push the on/off 

switch.