Sharp PN-70TB3: инструкция

Раздел: Видео Аудио Фото Оборудование

Тип: Цифровой Дисплей

Характеристики, спецификации

Тип дисплея:
ЖК (LED-подсветка)
Диагональ:
70"
Формат дисплея:
16:9
Макс. разрешение:
1920 x 1080
Входы:
3xHDMI, DisplayPort, VGA
Технология ЖК:
UV2A
Шаг точки:
0.8 мм
Количество цветов:
1.06 млрд. цветов
Время отклика экрана:
6 мс
Яркость:
300 кд/м²
Контрастность:
3000:1
Угол обзора по вертикали:
160
Угол обзора по горизонтали:
160
Стандарты совместимости:
VESA DDC2B, VESA DPMS
Настройки:
выбор сигнала, громкость, контраст, цветовая температура, яркость
Расположение:
встроенный
Потребляемая мощность:
225 Вт
Размеры (ШxВxГ):
1647x94x1010 мм
Вес устройства:
59 кг
Размер крепления:
400 х 200 мм
Разъемы:
3 x HDMI - 19 pin HDMI Type A
Сенсорное управление:
есть
Поддержка Multi-touch:
есть
Звук:
Стереоколонки (2 x 10Вт)
Кабели:
USB кабель

Инструкция к Цифровой Дисплей Sharp PN-70TB3

PN-70TA3

PN-60TA3

LCD MONITOR

MONITEUR LCD

MONITOR LCD

LCD FARBMONITOR

ЖК МОНИТОР

SETUP MANUAL

MANUEL D’INSTALLATION

MANUAL DE INSTALACIÓN

INSTALLATIONSANLEITUNG

РУКОВОДСТВО ПО УСТАНОВКЕ

ENGLISH ...... E1

FRANÇAIS ..... F1

香港電器安全規格

ESPAÑOL .... S1

國際電工委員會規格適合

DEUTSCH ..... D1

РУССКИЙ...... Р1

(

.ﺔﻘﻓﺮﳌﺍ CD-ROM ﺔﻧﺍﻮﻄﺳﺃ ﰲ ﺪﺟﻮﻳ ﺔﻴﺑﺮﻌﻟﺍ ﺔﻐﻠﻟﺎﺑ ﻞﻴﻟﺪﻟﺍ

ENGLISH FRANÇAIS ESPAÑOLENGLISH FRANÇAIS ESPAÑOL DEUTSCH РУССКИЙ

)

FOR CUSTOMERS IN U.K.

IMPORTANT

The wires in this mains lead are coloured in accordance with the following code:

GREEN-AND-YELLOW: Earth

BLUE: Neutral

BROWN: Live

As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the

terminals in your plug proceed as follows:

• The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in the plug which is marked by the

letter E or by the safety earth

or coloured green or green-and-yellow.

• The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured black.

• The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured red.

Ensure that your equipment is connected correctly. If you are in any doubt consult a qualied electrician.

“WARNING: THIS APPARATUS MUST BE EARTHED.”

Contents

[ENGLISH]

IMPORTANT INFORMATION ............................................1

Supplied Components .....................................................5

ENGLISH

DEAR SHARP CUSTOMER ..............................................1

Preparing the Remote Control Unit and the Touch Pen

..5

SAFETY PRECAUTIONS ..................................................2

Connections .....................................................................6

SAFETY INSTRUCTION ...................................................3

Turning Power On/Off ......................................................7

MOUNTING PRECAUTIONS ............................................4

Mounting Precautions

Specications ..................................................................4

(For SHARP dealers and service engineers) ...............10

For information on Touch Pen Utility, Touch Panel Settings Tool, Pen Software and Touch Display Link, see the manual for

each.

IMPORTANT INFORMATION

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT

TO RAIN OR MOISTURE.

The lightning ash with arrowhead symbol, within

a triangle, is intended to alert the user to the

CAUTION

presence of uninsulated “dangerous voltage”

within the product’s enclosure that may be of

RISK OF ELECTRIC

sufcient magnitude to constitute a risk of electric

SHOCK

shock to persons.

DO NOT OPEN

The exclamation point within a triangle is

intended to alert the user to the presence of

CAUTION: TO REDUCE THE RISK OF ELECTRIC

important operating and maintenance (servicing)

SHOCK, DO NOT REMOVE COVER.

instructions in the literature accompanying the

NO USER-SERVICEABLE PARTS

product.

INSIDE.

REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

DEAR SHARP CUSTOMER

Thank you for your purchase of a SHARP LCD product. To ensure safety and many years of trouble-free operation of your

product, please read the Safety Precautions carefully before using this product.

1

E

SAFETY PRECAUTIONS

Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly

handled. This product has been engineered and manufactured with the highest priority on safety. However, improper use can

result in electric shock and/or re. In order to prevent potential danger, please observe the following instructions when installing,

operating and cleaning the product. To ensure your safety and prolong the service life of your LCD product, please read the

following precautions carefully before using the product.

1. Read instructions — All operating instructions must be read and understood before the product is operated.

2. Keep this manual in a safe place — These safety and operating instructions must be kept in a safe place for future

reference.

3. Observe warnings — All warnings on the product and in the instructions must be observed closely.

4. Follow instructions — All operating instructions must be followed.

5. Cleaning — Unplug the power cord from the AC outlet before cleaning the product. Use a dry cloth to clean the product. Do

not use liquid cleaners or aerosol cleaners.

6. Attachments — Do not use attachments not recommended by the manufacturer. Use of inadequate attachments can result

in accidents.

7. Water and moisture — Do not use the product near water. Do not install the product in a place where water may splash onto

it. Be careful of equipment which drains water such as an air-conditioner.

8. Ventilation — The vents and other openings in the cabinet are designed for ventilation.

Do not cover or block these vents and openings since insufcient ventilation can cause overheating and/or shorten the life

of the product. Do not place the product on a sofa, rug or other similar surface, since they can block ventilation openings.

Do not place the product in an enclosed place such as a bookcase or rack, unless proper ventilation is provided or the

manufacturers instructions are followed.

9. Power cord protection — The power cords must be routed properly to prevent people from stepping on them or objects from

resting on them.

10. The screen used in this product is made of glass. Therefore, it can break when the product is dropped or applied with

impact. Be careful not to be injured by broken glass pieces in case the screen breaks.

11. Overloading — Do not overload AC outlets or extension cords. Overloading can cause re or electric shock.

12. Entering of objects and liquids — Never insert an object into the product through vents or openings. High voltage ows in

the product, and inserting an object can cause electric shock and/or short internal parts.

For the same reason, do not spill water or liquid on the product.

13. Servicing — Do not attempt to service the product yourself. Removing covers can expose you to high voltage and other

dangerous conditions. Request a qualied service person to perform servicing.

14. Repair — If any of the following conditions occurs, unplug the power cord from the AC outlet, and request a qualied service

person to perform repairs.

a. When the power cord or plug is damaged.

b. When a liquid was spilled on the product or when objects have fallen into the product.

c. When the product has been exposed to rain or water.

d. When the product does not operate properly as described in the operating instructions.

Do not touch the controls other than those described in the operating instructions. Improper adjustment of controls

not described in the instructions can cause damage, which often requires extensive adjustment work by a qualied

technician.

e. When the product has been dropped or damaged.

f. When the product displays an abnormal condition. Any noticeable abnormality in the product indicates that the product

needs servicing.

15. Replacement parts — In case the product needs replacement parts, make sure that the service person uses replacement

parts specied by the manufacturer, or those with the same characteristics and performance as the original parts. Use of

unauthorized parts can result in re, electric shock and/or other danger.

16. Safety checks — Upon completion of service or repair work, request the service technician to perform safety checks to

ensure that the product is in proper operating condition.

17. Wall mounting — When mounting the product on a wall, be sure to install the product according to the method

recommended by the manufacturer.

18. Heat sources — Keep the product away from heat sources such as radiators, heaters, stoves and other heat-generating

products (including ampliers).

19. Batteries — Incorrect use of batteries may cause the batteries to burst or ignite. A leaky battery may corrode the equipment,

dirty your hands or spoil your clothing. In order to avoid these problems, make sure to observe the precautions below:

• Use the specied batteries only.

Install the batteries with due attention to the plus (+) and minus (-) sides of the batteries according to the instructions in the

compartment.

• Do not mix old and new batteries.

• Do not mix batteries of different types. Voltage specications of batteries of the same shape may vary.

• Replace an exhausted battery with a new one promptly.

• If you will not use the remote control for a long time, remove the batteries.

If leaked battery uid gets on your skin or clothing, rinse immediately and thoroughly. If it gets into your eye, bathe your

eye well rather than rubbing and seek medical treatment immediately. Leaked battery uid that gets into your eye or your

clothing may cause a skin irritation or damage your eye.

E

2

Оглавление

Аннотации для Цифровой Дисплей Sharp PN-70TB3 в формате PDF