Sony SU-FL300M: CAUTION
CAUTION: Sony SU-FL300M
Table of contents
- CAUTION WARNING On Safety
- WARNING
- CAUTION
- To Sony dealers Step 1: Checking the parts
- Step 2: Assembling the TV Stand 1 2
- 4
- 5 2 Step 3: Preparing for the installation of the TV 1
- 2 Step 4: Installing the TV 1 3
- 2 Step 5: Safety measures to prevent toppling over 1 3
- Specifications Installing the Center Speaker (For Home Theatre Systems only)
- 1 2

Do not subject the glass to
CAUTION
excessive shock.
If the following precautions are not observed,
This TV Stand is made of
injury or property damage may occur.
tempered glass, but care should
be taken.
If the glass breaks, glass
Do not install any equipment other
fragments could cause injury, so
than the specified product.
observe the precautions below.
• This TV Stand is designed for use with the specified
• Do not hit the glass or drop
product only. If you install equipment other than specified,
sharp-pointed objects on the
it may fall or break, and cause injury.
glass. Avoid excessive shock.
• Do not place objects such as vases, pottery, etc., on the TV
• Do not scratch or poke the
Stand.
glass with sharp-pointed
• Do not modify the TV Stand.
objects.
• Do not place anything hot directly on the TV Stand. The
• Do not let hard objects such
heat may cause discoloration or deformation of the TV
as a vacuum cleaner hit the
Stand.
edges of the glass.
• Do not place anything directly on the TV Stand that may
damage the glass.
Note on carrying capacity
Be sure to secure the TV.
Do not place any equipment
which exceeds the
Secure the TV to the TV Stand using the supplied anchor
maximum weight for each
attachments. If the TV is not installed securely, it may fall, or
shelf as indicated in the
the TV Stand may topple over, and cause injury.
30 kg (66 lb 2 oz)
illustration.
Otherwise, the shelves may
Do not apply weight to the glass or
break.
subject it to any kind of impact.
Do not apply weight to the TV Stand with your hand when
Notes on installation
installing the TV. Do not hit the TV Stand with hard objects,
such as a screwdriver, etc. The glass may break and cause
• When assembling, lay the packing materials on the floor to
injury.
avoid damage to the floor.
• Install the TV Stand on a solid and flat floor. Do not allow
the TV Stand to be installed at an angle or incline. To
When carrying the TV Stand
avoid this, observe the following precautions.
Trying to move the TV Stand alone, or without following the
– Do not install the TV Stand in a place subject to direct
proper procedures, may cause injury. To avoid this, be sure to
sunlight or near a heater.
follow the advice given below.
– Do not install the TV Stand in a hot or humid place, or
• Be sure that two or more persons carry the TV Stand, and
outdoors.
only after removing the TV, connected equipment and
glass shelves.
• Do not drag the TV Stand. The base parts of the TV Stand
Note on use
may come off and damage the floor.
• Be careful not to allow your hands or feet to be pinched
To keep the TV Stand clean, occasionally wipe it with a dry
under the Base Board.
soft cloth. Stubborn stains may be removed by wiping with a
• Do not grab the glass shelf when carrying the TV Stand.
cloth slightly dampened with mild soap. Be sure to dry the
area afterwards with a dry soft cloth. Do not use chemicals,
such as thinner or benzine, as they damage the finish of the
TV Stand.
4 (GB)

