Sony SU-FL300M: 2 Step 4: Installing the TV 1 3

2

Install the TV onto the TV Stand.

Step 4:

1

Match the outline of the Table-Top Stand to the outline

Installing the TV

of the TV screen size and corner marks on the paper

template, so that the holes at the bottom of the Table-Top

Stand align to the sleeves which were attached in part 1

of Step 3.

Attach your TV to the Table-Top Stand if it is not already

2 Slide the TV back to lock into place.

attached.

3 Remove the paper template from the Top Board.

Only for the specified swivel models on page 2, follow the

procedure part 1 of Step 4.

1

Adjust the position of the swivel

plate to the center (For swivel

Paper template

models only).

Before installing the TV, align the tab of the swivel

plate with the notch in the Table-Top Stand.

Only for the specified swivel models on page 2

Swivel plate

A The white corner mark is for swivel models.

Tab

B

The black corner mark is for non-swivel models.

For swivel models only

Note

For 37/40 inch users, whether the TV is swivel model or

WARNING

not, align the Table-Top Stand with the black corner

mark. (There is no white corner mark on the paper

If the swivel plate is not adjusted correctly, the TV will

template for 37/40 inch.)

not be installed securely and it may fall.

3

Attach the anchor bolts.

Secure the two supplied anchor bolts to the rear of the TV.

Anchor bolt

Note

If the two anchor bolts are not used to secure the TV, it may

fall and cause injury.

9 (GB)