Sony SU-FL300M: 2 Step 5: Safety measures to prevent toppling over 1 3

2

Connect the cables.

Step 5:

Run the cables through the cable holders and the Rear

Safety measures to

Pillar holes.

prevent toppling over

WARNING

Be sure to take measures to prevent the TV Stand from

toppling over, and causing possible injury and damage.

1

Attach the support belt.

1 Screw the support belt to the TV Stand with the

supplied wood screw using the screwdriver.

2 Attach the support belt to the Table-Top Stand, and

screw the belt with the supplied securing screw

using a coin, etc.

Note

3 Adjust the length by tightening the support belt

If the cables are not installed properly, they might be pinched

while holding the Table-Top Stand.

and damaged, and could result in electric shock, etc.

3

Anchor the TV to the wall.

Prepare a strong, commercially-available rope or chain

and wall anchor bracket for this purpose.

1 Secure the wall anchor bracket to a solid wall.

2 Pass the rope or chain through both holes of the

anchor bolts and then tighten the other end of the

rope or chain to the wall anchor bracket.

Strong rope or

chain

Wall anchor bracket

10 (GB)