Sony CDP-XE520: Getting Started Where do I go next?

Getting Started

Getting Started

You can adjust the output level to the amplifier

Connecting the mains lead

(CDP-XE520 and CDP-XE320 only)

Press LINE OUT LEVEL +/– on the remote. You can

Connect the mains lead to a wall outlet.

reduce the output level up to –20␣ dB.

FADE

When you reduce the output level, “FADE” (or

for

the CDP-XE320) appears in the display.

Where do I go next?

When you turn off the player, the output level

automatically returns to the maximum level.

Now you’re ready to use your player.

If you aren’t familiar with how to play CDs, go to the section

“Playing a CD” on page 6.

• If you have a digital component such as a digital

Then, go to the following sections for other operations.

amplifier, D/A converter, DAT or MD

Connect the component via the DIGITAL OUT (OPTICAL)

connector using the optical cable (not supplied). Take off

the cap and plug in the optical cable.

Note that you cannot use the following functions when

making this connection:

• Fading In or Out (see page 15)

• Time Fade (see page 16)

• Adjusting the output level using the LINE OUT

LEVEL +/– buttons on the remote (see above)

POC-15

Optical cable (not supplied)

CD player

Digital component

DIGITAL

DIGITAL

OUT

INPUT

OPTICAL

OPTICAL

Note

When you connect via the DIGITAL OUT (OPTICAL)

connector, noise may occur when you play CD software other

than music, such as a CD-ROM.

If you have a Sony component with the CONTROL A1

jack (CDP-XE520 only)

Connect the component via the CONTROL A1 jack. You

can simplify the operation of audio systems composed of

separate Sony components. For details, refer to the

supplementary “S-Link

TM

/CONTROL-A1 Control

System” instructions.

GB

5