Zelmer 476: After operation (juice centrifuging)

After operation (juice centrifuging): Zelmer 476

You mustn't push the products with your fingers or other objects.

In case of the necessity (In case of excessive accumulation of the pulp on the filter,

which causes juice extractor vibrations) you can use TURBO button (b). The

engine operates in such case on maximal rotation for approximately 2 seconds.

After this time, the TURBO function switches off automatically, and the engine

returns to previous rotation.

ATTENTION! Repeated usage of TURBO function can take place after min. 10

seconds.

When centrifuging juice of small fruits, use the bowl for small fruits (7), put it on the

chute

.

Pour the extracted juice into glasses or cups prepared in advance

.

The juice collector (9) is equipped with foam separator (10), which task is to stop the

thicker particles of juice and foam.

We recommend natural version of juice, less clear. In order to obtain such

a juice it is necessary to remove the foam separator.

After operation (juice centrifuging)

Switch the juice extractor off, turning the switch (a) to position

„0”.

Unplug the appliance

.

After the motor stops start to disassemble the juice extractor in order to wash the

parts (see Preparing for operation”)

.

Remove the accumulated pulp from the pulp collector

.

Prevent the excess of the pulp collector. The excessive pulp can pour out while

leaning the collector during removing.

Juice extractor maintenance rules

Clean carefully after each usage, to prevent drying of juice and fruit remains

.

Remove the dirt from the corners with a bottle brush or tooth brush

.

Clean the motor with damped cloth sprinkled with washing up liquid. Then dry it

.

When water or juice getting into the motor, stop operation immediately and bring the

appliance to service for inspection.

The following elements of the equipment: juice bowl, insert, and lid, bowl for small

fruits, pusher and the juice collector including foam separator should be washed in

hot water with wash-up liquid.

You can clean them in dishwashers in maximum temperature 60ºC.

The exception is a filter (4). It should be washed with hard brush

(13) only, which is included to this juice extractor equipment. Do

not use any metal brushes to clean the filter!

87

Оглавление