Sony KDL-40R480B: Confirming the completion of the installation Other information 3 Preventing the bottom of the TV from shifting.
Confirming the completion of the installation Other information 3 Preventing the bottom of the TV from shifting.: Sony KDL-40R480B
Table of contents
- Installation Information for Using Sony Wall-Mount Bracket (SU-WL450)
- On Safety
- Do not allow the AC power cord or the connecting cable to be pinched.
- Installing the TV onto the wall
- Deciding on the installation location 1 Decide on the installation location.
- 2 Select Wall mounting style. It is selectable as shown below. 3 Fit Base Adaptor by using Screw (PSW 4x10) to Base (20) when selecting 2-a.
- Installing the Base on the wall 4 Decide the positions of the screws for installing the Base (20) .
- 2 Attach the Attachment parts for Preparing for the installation Wall-Mount Bracket. Check the of the TV Attachment parts by referring to 1 Detach the Table-Top Stand “Supplied with SU-WL450” in from the TV. “Checking the parts” on page
- 3 Bundle the AC Adapter using Installing the TV on the wall the cable holders (supplied with the TV). Make sure that the 1 Connect the necessary cable(s) label is facing outwards when to the TV. bundling AC adapter. 2 Install the TV onto the Base.
- Confirming the completion of the installation Other information 3 Preventing the bottom of the TV from shifting.
- Specifications
2-b
Confirming the completion of
the installation
Check the following points.
The Pulleys are firmly hung onto the
Base.
The cord and the cable are not twisted or
pinched.
The Belt is tight with no slack.
WARNING
Improper placement of the AC power cord, etc., may
cause fire or electric shock through a short circuit. Be sure
to confirm the completion of the installation for safety.
Other information
When removing the TV, reverse the previous
installation procedure.
WARNING
Be sure that two or more persons hold the TV when
carrying it.
GB
3 Preventing the bottom of the TV
from shifting.
Take up the slack of Belt and attach it
to the wall tightly.
2-a 2-b
WARNING
Be sure that two or more persons hold the TV when
removing it.
Use a 5 mm diameter screw or
equivalent (not supplied).
Note
Try to pull the bottom of the TV forwards yourself
slightly, to make sure that it does not move forward.
If there is any movement, it is not fixed correctly, and
the Belt should be secured firmly again.
− 11 (GB) −
