Sony CPD-E215E: Additional settings (SCREEN) Resetting the adjustments
Additional settings (SCREEN) Resetting the adjustments: Sony CPD-E215E
Table of contents
- Owner’s Record
- Table of Contents
- Precautions
- Identifying parts and controls
- Setup
- Step 3:Turn on the monitor and Selecting the on-screen menu computer language (LANGUAGE/ INFORMATION)
- Customizing Your Monitor Navigating the menu
- Adjusting the brightness and contrast Adjusting the centering of the picture (CENTER) Adjusting the size of the picture (SIZE)
- Enlarging or reducing the picture Adjusting the color of the picture (ZOOM) (COLOR) Adjusting the shape of the picture (GEOMETRY)
- Additional settings (SCREEN) Resetting the adjustments
- Technical Features Troubleshooting
- Trouble symptoms and remedies Symptom Check these items
- Symptom Check these items
- Self-diagnosis function Specifications
Additional settings (SCREEN)
Resetting the adjustments
You can manually degauss (demagnetize) the screen, and adjust
This monitor has the following three reset methods. Use the
the moire cancellation level.
RESET button to reset the adjustments.
1
Press the center of the control button.
The main MENU appears on the screen.
2
Move the control button m/M to highlight
SCREEN and press the center of the control button
again.
x
Resetting a single adjustment item
The SCREEN menu appears on the screen.
Use the control button to select the adjustment item you want to
3
Move the control button m/M to select the desired
reset, and press the RESET button.
adjustment item.
Adjust the selected item according to the following
x
Resetting all of the adjustment data for the
instructions.
current input signal
Press the RESET button when no menu is displayed on the screen.
x
Degaussing the screen
Note that the following items are not reset by this method:
The monitor is automatically demagnetized when the power is
• on-screen menu language (page 7)
turned on.
• picture’s rotation (page 10)
To manually degauss the monitor, first move the
control button m/M to select (DEGAUSS). Then move
x
Resetting all of the adjustment data for all
the control button ,.
input signals
The screen is degaussed for about 5 seconds. If a second degauss
Press and hold the RESET button for more than two seconds. All
cycle is needed, allow a minimum interval of 20 minutes for the
of the adjustment data (except for the USER settings in the
best result.
GB
COLOR menu) is reset to the factory preset levels.
x
Adjusting the moire
*
If elliptical or wavy patterns appear on the screen, adjust the
moire cancellation level.
To adjust the amount of moire cancellation, first move
the control button m/M to select (CANCEL MOIRE).
Then move the control button </, until the moire
effect is at a minimum.
* Moire is a type of natural interference which produces soft, wavy lines
on your screen. It may appear due to interference between the pattern
of the picture on the screen and the phosphor pitch pattern of the
monitor.
Example of moire
11
RESET
