Sharp PN-V602: Turning Power On/Off

Turning Power On/Off: Sharp PN-V602

Caution

• TurnonthemonitorrstbeforeturningonthePCor

playback device.

Turning on the main power

E

8

Main power switch

Caution

• Themainpowermustbeturnedon/offwiththemainpower

switch. Do not connect/disconnect the power cord or turn

the breaker on/off while the main power switch is on.

• WhenswitchingthemainpowerswitchorthePOWER

button off and back on, always wait for at least 5 seconds.

• Foracompleteelectricaldisconnection,pulloutthemain

plug.

Turning power on/off

PressthePOWERbuttonontheremotecontrolunitorthe

monitor itself to turn the power ON/OFF.

Whenthemainpowerswitchisoff,themonitorcannotbe

turnedonusingthePOWERbuttonontheremotecontrolunit.

Power LEDPower button

n

Operation mode

Whenthemonitoristurnedonforthersttimeafterbeing

shipped from the factory, the operation mode setting screen

willbedisplayed.SetittoMODE1orMODE2.

MODE1 ....OFF IF NO OPERATION is set to ON, and

STANDBYMODEissettoLOWPOWER.(These

settings can not be changed.)

If there is no operation for 4 hours or more, the

monitor automatically enters standby mode. Power

consumption in standby mode is also minimized.

MODE2 ....Willperformstandardoperation.

OFF IF NO OPERATION is set to OFF, and

STANDBYMODEissettoSTANDARD.These

settings can be changed.

Even after being set, changes can be made using

OPERATION MODE, located in the menu of the monitor. (See

Operation manual.)

n

Date/time setting

•

Ifthetimehasyettobesetwhenthemonitorisrstturnedon,

the date/time setting screen appears. Set the date and time.

Status of a power LED Status of the monitor

Green lighting Power on

Orange lighting Power off (Standby mode)

Greenashing Input signal waiting mode

Caution

• WhenswitchingthemainpowerswitchorthePOWER

button off and back on, always wait for at least 5 seconds.

A short interval may result in a malfunction.

DATE/TIME SETTING

//

:

:

SET

01 01 11

/

00 00

:/ 20

CANCEL

OK···[MENU]

1. Press , , or to select the date and

time, and press

or to change the numerical

values.

2. Press

or to select SET and then press

MENU

Turning Power On/Off

.

• Besuretosetthedateandtime.

•

The date/time setting screen will close automatically if no

operation is performed for about 15 seconds. The date

and time can be set using DATE/TIME SETTING from the

OPTION menu when the date/time setting screen disappears.

TIPS

•

Set the date in “Day/Month/Year” order.

•

Setthetimeona24-hourbasis.

•

The clock is maintained by the internal battery.

•

If you already set the time but the date/time setting

screen appears when the power is turned on, the

internal battery may be exhausted. Please contact

your local Sharp servicing dealer or service center for

assistance with battery replacement.

•

Estimated service life of the internal battery: About 5

years (depending on monitor operation)

•

The initial battery was inserted at the factory when the

monitor was shipped, so it may run out of power before

its expected operation life.