Sony CDX-L550V: Adjusting the sound Changing the sound and characteristics display settings Quickly attenuating the sound

Adjusting the sound

Changing the sound and

characteristics

display settings

— Menu

You can adjust the bass, treble, balance, and

fader.

The following items can be set:

The bass and treble levels can be stored

independently for each source.

SET (Set Up)

• CLOCK (page 8)

1 Select the item you want to adjust by

• CT (Clock Time) (page 16)

pressing (SOUND) repeatedly.

• BEEP — to turn the beeps on or off.

Each time you press (SOUND), the item

• RM (Rotary Commander) — to change the

changes as follows:

operative direction of the controls of the rotary

BAS (bass) t TRE (treble) t BAL (left-

commander.

right)

t FAD (front-rear)

– Select “NORM” to use the rotary commander

2 Adjust the selected item by pressing

as the factory-set position.

either side of (SEEK).

– Select “REV” when you mount the rotary

When adjusting with the rotary commander,

commander on the right side of the steering

press (SOUND) and rotate the VOL control.

column.

Note

Adjust within 3 seconds after selecting the item.

DSPL (Display)

• D.INFO (Dual Information) — to display the

clock and the play mode at the same time (on).

• AMBER/GREEN — to change the

Quickly attenuating the

illumination colour to amber or green (CDX-

L550 only).

sound

• DIM (Dimmer) — to change the brightness of

the display (CDX-50V only).

(With the rotary commander)

– Select “ON” to dim the display.

– Select “OFF” to deactivate the Dimmer.

Press (ATT) on the rotary commander

• M.DSPL (Motion Display) — to select the

or card remote commander.

Motion Display mode from “1,” “2,” and

After “AT T- ON ” momentarily appears, the

“OFF.”

“AT T” appears in the display.

– Select “1” to show decoration lines in the

display and activate Demo display.

To restore the previous volume level, press

– Select “2” to show decoration lines in the

(ATT) again.

display and deactivate Demo display.

Tip

– Select “OFF” to deactivate the Motion

When the interface cable of a car telephone is

Display.

connected to the ATT lead, the unit decreases the

• A.SCRL (Auto Scroll)

volume automatically when a telephone call comes in

– Select “ON” to scroll all automatically

(Telephone ATT function).

displayed names exceeding 8 characters.

– When Auto scroll is set to off and the disc/

track name is changed, the disc/track name

does not scroll.

SND (Sound)

• LOUD (Loudness) — to enjoy bass and treble

even at low volumes. The bass and treble will

be reinforced.

18