Sony CDX-4000R RU: Presetting the RDS stations with the AF and TA data
Presetting the RDS stations with the AF and TA data: Sony CDX-4000R RU
Table of contents
- Welcome ! Precautions
- Notes on CDs
- Table of Contents
- Location of controls
- Resetting the unit Detaching the front panel
- Turning the unit on/off Setting the clock How to use the menu
- Listening to a CD
- Automatically scrolling a disc name Locating a specific track — Auto Scroll — Automatic Music Sensor (AMS) Locating a specific point in a track — Manual Search
- Playing a CD in various modes Memorising stations automatically
- Receiving the memorised stations Memorising only the desired stations
- Overview of the RDS function Displaying the station name
- Retuning the same programme automatically
- Listening to traffic announcements
- Presetting the RDS stations with the AF and TA data
- Locating a station by programme type
- Setting the clock automatically Labelling the rotary commander (optional)
- Using the rotary commander (optional)
- Adjusting the sound characteristics
- Attenuating the sound Changing the sound and display settings
- Boosting the bass sound Maintenance
- Cleaning the connectors Dismounting the unit
- Specifications CD player section General Tuner section Power amplifier section
- Troubleshooting guide General CD playback
- Radio reception RDS
To cancel the current traffic
announcement
Presetting the RDS
Press (TA), (SOURCE) or (MODE).
stations with the AF and
To cancel all traffic announcements, turn off
the function by pressing (TA) until “TA-
TA data
OFF” appears.
When you preset RDS stations, the unit stores
each station’s data as well as its frequency, so
Presetting the volume of traffic
you don’t have to turn on the AF or TA
announcements
function every time you tune in the preset
station. You can select a different setting (AF,
You can preset the volume level of the traffic
TA, or both) for individual preset stations, or
announcements beforehand so you won’t miss
the same setting for all preset stations.
the announcement. When a traffic
announcement starts, the volume will be
automatically adjusted to the preset level.
Presetting the same setting for all
preset stations
1 Turn the volume control dial to adjust
1 Select an FM band (page 10).
the desired volume level.
2 Press (AF) and/or (TA) to select “AF-ON”
2 Press (TA) for two seconds.
and/or “TA-ON.”
“TA” appears and the setting is stored.
Note that selecting “AF-OFF” or “TA-OFF”
stores not only RDS stations, but also
Receiving emergency
non-RDS stations.
announcements
If an emergency announcement comes in while
3 Press (MENU), then press either side of
you are listening to the radio, the programme
(PRST) repeatedly until “BTM” appears.
will be automatically switched to it. If you are
listening to a source other than the radio, the
4 Press the (+) side of (SEEK/AMS) until
emergency announcements will be heard if
“BTM” flashes.
you set AF or TA to ON. The unit will then
automatically switch to these announcements
no matter which source you are listening to at
5 Press (ENTER).
the time.
Presetting different settings for
each preset station
1 Select an FM band, and tune in the
desired station (page 10).
2 Press (AF) and/or (TA) to select “AF-ON”
and/or “TA-ON.”
3 Press the desired number button until
“MEM” appears.
Repeat from step 1 to preset other stations.
15
