Zelmer 13Z018: 12. Programming the memory function (P1 and P2)

12. Programming the memory function (P1 and P2): Zelmer 13Z018

Fig. 4 Fig. 5 Fig. 6 Fig. 7

CAUTION!

If the water in the water tank (1) runs out of water during the coffee brewing process, the espresso

machine will stop working. The indicator

will flash on the display panel and you will hear a repeating sound

signal informing you about the necessity to fill in water. Open the water tank cover (1) and pour in the water.

After replenishing water, the sound signal will stop and the espresso machine will automatically finish the coffee

brewing process.

CAUTION!

It is possible to stop the coffee brewing process at any given moment. It is enough to push the Power

on/off button

(A).

12. Programming the memory function (P1 and P2)

The espresso machine has two memory modes letting you program your custom settings including temperature, espresso

instant bags mode or ground coffee mode, selecting 1 or 2 cups and a given amount of coffee.

The programming process includes the following steps:

12.1. Unplug the espresso machine from the power supply.

12.2. Fill the water tank (1) according to paragraph 4.

12.3. Plug the espresso machine by putting the cord into the socket. The machine will turn on. The display panel and

the power on/off button

(A) will flash. The display panel will indicate power is on .

12.4. Push the power on/off button

(A). You will hear a sound signal.

12.5. The

indicator on the display panel will begin to whirl, signalizing that the espresso machine is heating up.

12.6. When the

indicator stops whirling, you will hear a sound signal informing you that the machine is ready for

use (has reached the right temperature).

12.7. Choose espresso instant bags mode or ground coffee mode by pressing single/double cup select button

(B) for 2 seconds. After each push you will hear a sound signal.

12.8. Pour ground coffee by means of a measuring cup (14) or insert espresso instant bags into the filter handle

container (7).

12.9. Remove the excess of coffee from the edge of the filter and compress the coffee by the permanent coffee

compressor (6) or the whip of the measuring cup (14) (Fig. 4).

12.10. Attach filter handle (7) to the brew head (5), by turning it with a firm motion to the right (Fig. 3).

12.11. Place a cup or cups on the drip tray grid (8), directly under the brew head (5).

12.12. Select program

or by pressing the coffee amount select button (C). After each push you will hear

a sound signal.

12.13. Press and hold the single/double cup select button

(B) and temperature select button (D) for

2 seconds.

or indicator will flash on the display panel.

12.14. Select temperature setting (see paragraph 9), choose espresso instant bags mode or ground coffee mode

(see paragraph 10) and the single cup (

indicator) or double cup ( indicator) select button

(B).

12.15. Push the brew coffee button

(F) and espresso will come out of the machine. The display panel will

indicate

(after choosing a double cup) or (after choosing a single cup). After getting the coffee

release the brew coffee button

(F). You will hear two sound signals and the display panel will indicate

or .

12.16. After saving the settings

or indicator will stop flashing and you will hear a sound signal.

12.17. Remove the filter handle by turning it to the left (Fig. 5) and throw out the used bag or coffee grounds (Fig. 6).

Clean the filter with water (Fig. 7).

CAUTION!

While holding the brew coffee button (F) remember that after when a single cup is filled to the

maximum (ca. 90 ml), the machine will automatically stop the brewing process (you will hear two sound signals)

and save the settings.

111

Оглавление