Fagor BV-1000X: 5. CLEANING

11

be connected if the accessories are 

correctly fitted to the unit.

•

  Make sure the dial

 (8) 

is turned to OFF. 

Unwind the cable from the base and 

plug in the blender. 

•

  Open the lid

 (2)

 or the dispenser cap

 (1)

by turning them clockwise and pour the 

food or drink for blending into the jug. 

•

  Tightly close the lid

 (fig. F) 

and fit the 

dispenser cap, turning it anti-clockwise 

(fig. G)

.

FUNCTIONING

Switch on the blender by turning the 

selector (8) to ON. 

There are options for adjusting the rotation 

speed or for quick selection, depending on 

your needs:

•

  Speed controller: Select the speed by 

turning the selector (8) between MIN and 

MAX, if you wish to control the speed 

yourself. 

•  Quick selection: Press one of the three 

quick selection buttons, according to 

your requirements. The corresponding 

pilot light will come on and the appliance 

will start to run.  

-  

"Ice" (10.a)

: this function is 

recommended for crushing ice. 

  The blender runs intermittently for 2 

minutes. If you wish to stop it before 

this time, press the button again.   

-  

"Smoothie" (10.b)

: this function 

is recommended for making milk 

shakes, fine purées, etc., and it runs 

for 2 minutes. 

  If you wish to stop it before this time, 

press the button again.  

-  

"Pulse" (10.c)

: To blend with short 

pulses, press this button, release it 

and press it again until you obtain the 

desired mixture. This function can be 

used for cleaning the jug. To do this, 

pour some water and a little cleaning 

product into the jug. 

When you have finished, switch off the 

blender by turning the dial 

(8)

 to OFF, and 

unplug it. To pour out the contents of the 

jug, remove the lid

 (2) 

(together with the 

dispenser cap) from the jug and remove 

the jug 

(3)

 from the motor base 

(7) 

before 

pouring out the contents of the jug.

5. CLEANING

•

  The appliance should be cleaned 

immediately after use. 

•  You may clean the glass jug 

automatically. Pour some water and 

a little liquid soap into the jug and 

press the “Pulse” button. The jug will 

automatically self-clean. 

•  Dismantle the blender by following the 

assembly instructions in reverse order 

(see the “Assembly” section).

•  Clean all the removable components in 

warm soapy water and dry them. 

•  Clean the motor base with a dry cloth. 

Do not submerge the motor base in 

water or in any other liquid, and do not 

place it under the tap.

6. INFORMATION FOR THE CORRECT  DISPOSAL OF ELECTRICAL AND  ELECTRONIC APPLIANCES

At the end of its working 

life, the product must not be 

disposed of as urban waste. 

It must be taken to a special 

local authority differentiated 

waste collection centre or to 

a dealer providing this service. Disposing 

of a household appliance separately avoids 

possible negative consequences for the 

environment and health deriving from 

inappropriate disposal and enables the 

constituent materials to be recovered to 

obtain significant savings in energy and 

resources. 

To remind you that you must collaborate 

with a selective collection scheme, the 

symbol shown appears on the product 

warning you not to dispose of it in 

traditional refuse containers.

For further information, contact your local 

authority or the shop where you bought the 

product.

Then clean the blender.