Sony KDL-40P300H: Safety information

010COV.book Page 2 Friday, November 9, 2007 4:48 PM

Installed with stand

Safety information

30 cm

10 cm10 cm

6 cm

Installation/Set-up

Install and use the TV set in accordance with the

instructions below in order to avoid any risk of fire,

electrical shock or damage and/or injuries.

Leave at least this space around the set.

Installation

• The TV set should be installed near an easily accessible

• To ensure proper ventilation and prevent the collection of

mains socket.

dirt or dust:

• Place the TV set on a stable, level surface.

– Do not lay the TV set flat, install upside down,

• Only qualified service personnel should carry out wall

backwards, or sideways.

installations.

– Do not place the TV set on a shelf, rug, bed or in a

• For safety reasons, it is strongly recommended that you

closet.

use Sony accessories, including:

– Do not cover the TV set with a cloth, such as curtains,

– KDL-40P30xH/ KDL-37P30xH/ KDL-32P30xH:

or items such as newspapers, etc.

Wall-mount bracket SU-WL500.

– Do not install the TV set as shown below.

– KDL-26P30xH/KDL-26T26xH:

Air circulation

Air circulation

Wall-mount bracket SU-WL100.

is blocked.

is blocked.

Transporting

• Before transporting the TV set,

disconnect all cables.

• Two or three people are needed to

transport a large TV set.

Wall

Wall

• When transporting the TV set by

hand, hold it as shown on the right.

Do not put stress on the LCD panel

and the frame around the screen.

• When lifting or moving the TV set,

hold it firmly from the bottom.

• When transporting the TV set, do

not subject it to jolts or excessive

vibration.

• When transporting the TV set for repairs or when moving,

pack it using the original carton and packing material.

Mains lead

Handle the mains lead and socket as follows in order

Ventilation

to avoid any risk of fire, electrical shock or damage

• Never cover the ventilation holes or insert anything in the

and/or injuries:

cabinet.

– Use only Sony mains leads, not those of other brands.

• Leave space around the TV set as shown below.

– Insert the plug fully into the mains socket.

• It is strongly recommended that you use a Sony wall-

– Operate the TV set on a 220-240 V AC supply only.

mount bracket in order to provide adequate air-circulation.

– When wiring cables, be sure to unplug the mains lead

for your safety and take care not to catch your feet on

Installed on the wall

the cables.

– Disconnect the mains lead from the mains socket before

30 cm

working on or moving the TV set.

– Keep the mains lead away from heat sources.

– Unplug the mains plug and clean it regularly. If the plug

10 cm

10 cm

is covered with dust and it picks up moisture, its

insulation may deteriorate, which could result in a fire.

Notes

• Do not use the supplied mains lead on any other

10 cm

equipment.

• Do not pinch, bend, or twist the mains lead excessively.

Leave at least this space around the set.

The core conductors may be exposed or broken.

• Do not modify the mains lead.

• Do not put anything heavy on the mains lead.

• Do not pull on the mains lead itself when disconnecting

the mains lead.

• Do not connect too many appliances to the same mains

socket.

GB

2