Sony CDX-4000RV: Listening to traffic announcements

Listening to a regional programme

The “REG-ON” (regional on) function lets you

Listening to traffic

stay tuned to a regional programme without

announcements

being switched to another regional station.

(Note that you must turn the AF function on.)

The Traffic Announcement (TA) and Traffic

The unit is factory preset to “REG-ON,” but if

Programme (TP) data lets you automatically

you want to turn off the function, do the

tune in an FM station that is broadcasting

following.

traffic announcements even if you are listening

to other programme sources.

1 During radio reception, press (MENU),

then press either side of (PRST)

Press (TA) repeatedly until “TA-ON”

repeatedly until “REG” appears.

appears.

The unit starts searching for traffic

2 Press the (+) side of (SEEK/AMS) until

information stations. “TP” appears in the

“REG-OFF” appears.

display when the unit finds a station

broadcasting traffic announcements.

When the traffic announcement starts,

3 Press (ENTER).

“TA” flashes. The flashing stops when the

Note that selecting “REG-OFF” might cause

traffic announcement is over.

the unit to switch to another regional

station within the same network.

Tip

If the traffic announcement starts while you are

To return to regional on, select “REG-ON” in

listening to another programme source, the unit

step 2.

automatically switches to the announcement and

goes back to the original source when the

Note

announcement is over.

This function does not work in the United

Kingdom and in some other areas.

Notes

• “NO TP” flashes for five seconds if the received

station does not broadcast traffic

Local link function

announcements. Then, the unit starts searching

(United Kingdom only)

for a station that broadcasts it.

• When “EON” appears with “TP” in the display,

The Local Link function lets you select other

the current station makes use of broadcast traffic

local stations in the area, even if they are not

announcement of other stations in the same

stored on your number buttons.

network.

1 Press a number button that has a local

station stored on it.

2 Within five seconds, press the number

button of the local station again.

3 Repeat this procedure until the desired

local station is received.

14