Fagor B-575MA: •

7

1.

 On/off 

switch

2.

 Turbo 

button

3.

 Motor 

casing 

4.

 Mixer 

base

5.

 Blade

6.

 Plug 

cable

7.

 Speed 

control

8.

 Whisk 

coupling

9.

 Whisk

10.

 Chopper lid

11.

 Chopper bowl

12.

 Chopper blade

13.

 Graduated jug

14.

 Removal button

Voltage: 

230V 50Hz

• 

Please read this manual carefully before 

using the blender for the first time and 

keep it handy for any later consultation. 

This will ensure that you obtain the best 

results with the maximum safety.

• 

Before using the blender check that the 

mains voltage is the same as that shown 

on the blender.

• 

If the electricity socket and the blender 

plug are incompatible, change the 

socket for a suitable one by contracting 

a professionally qualified electrician.

• 

We do not advise you to use adapters, 

plugs or extension cables. If such a 

device is indispensable, use only single 

or multiple adapters and extension 

3. SAFETY WARNINGS 2. TECHNICAL DATA 1. DESCRIPTION OF THE BLENDER  (Fig.1)

cables that comply with current safety 

standards, taking care not to surpass the 

capacity shown on the adapter and/or 

the extension cable. 

• 

After unpacking, check that the blender 

is in a perfect condition; if in doubt, 

contact the nearest Service Centre.

• 

The packaging (plastic bags, polystyrene 

foam, etc.) should not be left within 

reach of children, as it is a potential 

source of danger.

• 

This blender should be employed solely 

for domestic use. Use for any other 

purpose is considered inadequate and 

dangerous.

• 

In the event of the blender breaking 

down or malfunctioning, switch it off and 

do not attempt to repair it.

• 

If the blender needs repairing, only 

use a Service Centre authorised by the 

manufacturer and request that original 

spares are used. If this advice is not 

followed, the safety of the blender may 

be compromised.

• 

Do not change the cable. If it is broken 

or needs to be changed, contact a 

Service Centre authorised by the 

manufacturer. Do not use the blender 

when the cable or plug is damaged.

• 

The manufacturer will not be liable 

for any damage that may arise from 

inappropriate, erroneous or improper use 

or from repairs carried out by unqualified 

persons.

When using any electrical appliance, 

certain fundamental rules must be 

followed.

ESPECIALLY

•  Do not touch or pull the cable with wet 

or damp hands or feet.

• 

To prevent electric shocks, do 

not immerse the appliance or the 

cable or the plug in water or put 

it under the tap.

• 

Do not touch the blade whilst the 

blender is in operation.

• 

The whisk should be fitted or removed 

only when the appliance is unplugged.

• 

Do not allow the cable to hang over the 

edge of a table or work-surface or to 

EN

B-415 P 

400 W

 B-515 

M

 B-575 

MA 

500 W

 B-615 

M

 B-675 

MA 

600 W

positioning marks and pressing it into the 

motor body 

(3) 

until you hear a click.

 (Fig.2)

NOTE:

 To remove the blender stem, press 

the removal button 

(14)

.

After adjusting the blender stem 

(4)

, plug in 

the appliance. Place the food you wish to 

blend in a suitable container, and position 

the blender as shown in 

figure 7

. Press the 

On/Off switch

 (1)

. On models B-615M and 

B-675 MA, select the speed by turning the 

speed controller

 (7)

. If you wish, you may 

press the turbo button 

(2)

 to blend at top 

speed.

IMPORTANT: Do not use the plastic 

blender stem (model B-415 P only) to 

blend any food at a temperature of over 

60ºC.

Egg white beating function (mod. 

B-575MA, B-675MA)

Insert the egg white beater into the blender 

coupler until it fits into place

 (fig.5)

. Then 

fit it to the blender body by aligning the 

positioning marks and pressing it in until 

you hear a click

 (fig. 6

). Place the blender 

in the container, plug in the appliance and 

press the On/Off button to start beating 

the egg whites. Use the speed controller to 

select a speed (models B-615M and B-675 

MA), or press the turbo function button. 

You may use the glass

 (13)

 or another type 

of container for beating the egg whites.

Mincing function (mod. B-575 MA, B-675 MA)

The mincer can be used for fruit and nuts, 

herbs, boiled eggs, dry bread, etc.

Place the mincer blade 

(12)

 in the centre of 

the bowl 

(fig. 3)

. Place the ingredients you 

wish to mince in the mincer bowl. 

Place the mincer lid 

(10)

 on the mincer jug, 

making sure it is correctly aligned with the 

mincer blade. Insert the motor body

 (3)

 in 

the mincer lid 

(3)

 by aligning the positioning 

marks and pressing it in until you hear a 

click 

(Fig. 4)

. Plug in the appliance and 

press the On/Off button. Use the speed 

controller 

(7)

 to select a speed (models 

B-615M and B-675 MA only) or press the 

turbo button 

(2)

 for quicker mincing. When 

you have finished mincing the food, make 

8

come into contact with hot surfaces.

• 

Do not pull the cable to unplug the 

appliance.

• 

Unplug the blender when it is not in use, 

before fitting or removing the mixer base 

and before cleaning it.

• 

Do not allow children to use the 

appliance.

• 

Before connecting the blender, ensure 

that the mixer base is correctly fitted to 

the appliance.

• 

Do not use or place any part of the 

blender on or near to hot surfaces (gas 

or electric hotplates or ovens).  

• 

This appliance should not be used 

by physically, sensorially or mentally 

handicapped people or people without 

experience or knowledge of it (including 

children), unless they are supervised or 

instructed in the use of the appliance by 

a person responsible for their safety.

• 

Children should be watched to ensure 

they do not play with the appliance.

• 

For greater protection, we recommend 

installing a residual current device (RCD) 

with an operational residual current not 

exceeding 30 mA. Ask your installer for 

advice.

Preparing for use

This blender is designed to process small 

quantities of foodstuff and should not be 

used for any other purpose. 

Before using for the first time, clean the 

casing of the motor with a damp cloth. 

Wash the shaft and the blade in hot, soapy 

water; do not immerse the upper part of the 

shaft. Dry all the pieces thoroughly. 

IMPORTANT: Before fitting or removing any 

of the parts of this blender, unplug it from 

the mains.

Blender function

The blender can be used to blend 

light foods, for making sauces, soups, 

mayonnaise or puree, for example. Insert 

the blender stem 

(4)

 by aligning the 

4. OPERATION