Sharp PN-U553: Turning Power On/Off

Turning Power On/Off: Sharp PN-U553

Turning Power On/Off

Caution

ENGLISH

Turn on the monitor rst before turning on the PC or

playback device.

Turning on the main power

7

E

Caution

The main power must be turned on/off with the main power

switch. Do not connect/disconnect the power cord or turn

the breaker on/off while the main power switch is on.

When switching the main power switch or the POWER

button off and back on, always wait for at least 5 seconds.

For a complete electrical disconnection, pull out the main

plug.

Turning power on/off

Press the POWER button or POWER switch to turn the power

ON/OFF.

The Power switch is located on the back of the monitor.

Use the position of the slot on the front as a guideline for

operation of the switches. (The switch with the protrusion is

the Power switch.)

Power switch

Guideline

Power LED

n

Operation mode

When the monitor is turned on for the rst time after being

shipped from the factory, the operation mode setting screen

will be displayed. Set it to MODE1 or MODE2.

MODE1 ... OFF IF NO OPERATION is set to ON, and

STANDBY MODE is set to LOW POWER. (These

settings can not be changed.)

If there is no operation for 4 hours or more, the

monitor automatically enters standby mode. Power

consumption in standby mode is also minimized.

MODE2 ... Will perform standard operation.

OFF IF NO OPERATION is set to OFF, and

STANDBY MODE is set to STANDARD. These

settings can be changed.

Even after being set, changes can be made using

OPERATION MODE, located in the menu of the monitor. (See

OPERATION MANUAL.)

n

Date/time setting

If the time has not been set, such as when the monitor

is rst turned on, set the date and time in DATE/TIME

SETTING of the SETUP menu.

Be sure to set the date and time.

TIPS

Set the date in “Year/Month/Day” order.

Set the time on a 24-hour basis.

The clock stops if the main power remains off for about 1

week.*

(* Approximate time. The actual time varies depending

on the state of the monitor.)

Status Status of the monitor

Green lit Power on

Orange lit Power off (Standby mode)

Green ashing Input signal waiting mode