Sharp PN-R703: MOUNTING PRECAUTIONS

MOUNTING PRECAUTIONS

• This product is for use indoors.

• A mounting bracket compliant with VESA specications is

required.

• Since the monitor is heavy, consult your dealer before

installing, removing or moving the monitor.

• Mounting the monitor on the wall requires special expertise

and the work must be performed by an authorized SHARP

dealer. You should never attempt to perform any of this

work yourself. Our company will bear no responsibility

for accidents or injuries caused by improper mounting or

mishandling.

• Use the monitor with the surface perpendicular to a level

surface. If necessary, the monitor may be tilted up to 20

degrees upward or downward.

• This monitor should be used at an ambient temperature

between 32°F (0°C) and 104°F (40°C). Provide

enough space around the monitor to prevent heat from

accumulating inside.

E

4

• Adhere to the following when installing the monitor in its

portrait orientation. Failing to adhere to the following may

cause malfunctions.

- Install the monitor such that the power LED is located on

the bottom side.

- Set the MONITOR on the MONITOR menu to PORTRAIT.

(See OPERATION MANUAL.)

- Be sure to clamp the power cord (supplied) onto the cable

clamp attachment using the supplied cable clamp.

When clamping the power cord, take care not to stress

the terminal of the power cord. Do not bend the power

cord excessively.

• If it is difcult to provide sufcient space for any reason

such as the installation of the monitor inside a housing, or

if the ambient temperature may be outside of the range

of 32°F (0°C) to 104°F (40°C), install a fan or take other

measures to keep the ambient temperature within the

required range.

• Temperature condition may change when using the monitor

together with the optional equipments recommended by

SHARP. In such cases, please check the temperature

condition specied by the optional equipments.

• Do not block any ventilation openings. If the temperature

inside the monitor rises, this could lead to a malfunction.

• Do not place the monitor on a device which generates heat.

• Use the supplied vertical sticker when you install the

monitor in portrait orientation.

Do not remove the factory-afxed sticker but afx the

sticker over it. Be careful not to cover the remote control

sensor or buttons.