Sharp PN-E703: Specications

Specications

Model PN-E703 PN-E603

Power requirement

AC 100 - 240 V, 2.8 - 1.2 A, 50/60 Hz AC 100 - 240 V, 2.1 - 1.0 A, 50/60 Hz

Operating temperature

*

32°F to 104°F (0°C to 40°C)

Operating humidity 20% to 80% (no condensation)

Power consumption 225 W 180 W

Dimensions (excluding protrusions) inch (mm)

Approx. 62-1/8 (W) x 1-9/16 (D) x

Approx. 54-1/4 (W) x 1-9/16 (D) x

36-1/16 (H) (1578 x 39.4 x 916)

31-1/4 (H) (1378 x 39.4 x 794)

Weight lbs. (kg)

Approx. 94.8 (43) Approx. 70.5 (32)

* Temperature condition may change when using the monitor together with the optional equipments recommended by SHARP. In such

cases, please check the temperature condition specied by the optional equipments.

As a part of our policy of continuous improvement, SHARP reserves the right to make design and specication changes for product improvement

without prior notice. The performance specication gures indicated are nominal values of production units. There may be some deviations from

these values in individual units.

Mounting Precautions (For SHARP dealers and service engineers)

• When installing, removing or moving the monitor, ensure that this is carried out by at least 3 people.

(PN-E603: at least 2 people.)

• Be sure to use a wall-mount bracket designed or designated for mounting the monitor.

• This monitor is designed to be installed on a concrete wall or pillar. Reinforced work might be necessary for some materials

such as plaster / thin plastic board / wood before starting installation.

• This monitor and bracket must be installed on a wall which can endure at least 4 times or more the weight of the monitor.

Install by the most suitable method for the material and the structure.

• To attach a VESA-compliant mounting bracket, use M6 screws that are 5/16 inch (8 mm) to 3/8 inch (10 mm) longer than the

thickness of the mounting bracket.

• Do not use an impact driver.

• When moving the monitor, be sure to hold the areas shown in the gure below. Do not hold the LCD panel. This may cause

product damage, failure, or injury.

• After mounting, please carefully ensure the monitor is secure, and not able to come loose from the wall or mount.

• Do not use any screw holes other than VESA holes for installation.

E

8