Hama BC-500D: Cleaning and care
Cleaning and care: Hama BC-500D

Cleaning and care
Safety instructions
DANGER
Danger of death due to electrical current!
Adhere to the following safety instructions to avoid dangers
associated with electrical current:
►
Switch off the device and unplug the power supply adapter
before cleaning.
WARNING
Danger due to leaking battery acid!
Leaking battery acid can cause injuries (skin irritation) and damage
to the device.
►
Wear protective gloves.
Cleaning
■
Clean the device with a damp cloth and a mild cleaning agent
only.
Troubleshooting
This chapter contains important information for localising and rectifying
errors. Observe the information to avoid dangers and material
damage.
Safety instructions
WARNING
Observe the following safety instructions to avoid safety risks and
material damage:
►
Repairs to electrical devices may only be carried out by
specialists who have been trained by the manufacturer.
Improper repairs can result in signi
fi
cant danger to the operator
and damage to the device..
Video Timeout
This sets the period of time after which the video output is switched
off.
Possible settings: No (no switching off), 30, 60, 90 or 120 seconds.
glichkeiten: No (keine Abschaltung), 30, 60, 90 oder 120 Sekunden.
NOTE
►
When the VOX function is activated, the function is only
switched off when no noises are registered by the baby unit for
the set time period..
“Info” menu item
Displays the current settings..
52
Baby-Control BC-500D
GB
53
Baby-Control BC-500D
GB
00092662man_de_en_es_fr_pl_ru.indd Abs3:52-Abs3:53
00092662man_de_en_es_fr_pl_ru.indd Abs3:52-Abs3:53
08.02.10 07:57
08.02.10 07:57

Error
Possible cause
Solution
Flickering image
Distance between
baby unit and baby is
too small
Increase the distance between
the baby unit and baby.
Steel structures and
concrete walls may
have a negative effect
on transmission
Change the location of the baby
unit and parent unit.
Interference from
other devices
Switch to another channel.
Identify and remove the sources
of interference.
Audio feedback
Distance between the
baby unit and parent
unit is too small
Increase the distance to at least
1 metre.
Volume is too high
Decrease the volume.
No connection
between the
parent unit and
baby unit
Different channels
have been set
Ensure that the same channel is
set on both units.
Baby unit is not
switched on
Switch on the baby unit.
Distance between the
baby unit and parent
unit is too large
Reduce the distance between
the baby unit and parent unit.
Batteries in the baby
unit are too weak
Replace the batteries in the
baby unit or connect the power
supply adapter.
NOTE
►
Contact our customer service department if the problem remains
after taking the steps detailed above.
Causes of errors and error recti fi cation
The following table can be used to localise and rectify minor errors
with the device:
Error
Possible cause
Solution
Display is empty
Device is switched
off
Switch on the device.
Power supply
adapter not
connected correctly
Ensure that the power supply
adapter is plugged in and
connected to the device.
Batteries are empty
Replace the batteries or
recharge the rechargeable
batteries.
No mains power
Check your fuse box..
Device is faulty
Inform our customer service
department.
No noises or
images recorded
by the baby unit
are shown on the
parent unit
Incorrect display
brightness
Adjust the display brightness
according to the surroundings.
Device is not in
Normal
mode
Switch the device to
Normal
mode.
Video Timeout is
activated
Switch on the video output..
Volume is too low
Increase the volume.
Interference from
other devices
Switch to another channel.
Identify and remove the sources
of interference.
Displayed images
are too dark
Image brightness is
set too low
Increase the display brightness.
54
Baby-Control BC-500D
GB
55
Baby-Control BC-500D
GB
00092662man_de_en_es_fr_pl_ru.indd Abs3:54-Abs3:55
00092662man_de_en_es_fr_pl_ru.indd Abs3:54-Abs3:55
08.02.10 07:57
08.02.10 07:57
Оглавление
- Sicherheit
- Aufbau und Funktion
- Inbetriebnahme
- Bedienung und Betrieb
- Reinigung und P fl ege
- Entsorgung
- Safety
- Design and functionality
- Getting started
- Operation
- Cleaning and care
- Disposal
- Sécurité
- Structure et fonctionnement
- Mise en service
- Commande et utilisation
- Nettoyage et entretien
- Elimination
- Seguridad
- Estructura y funcionamiento
- Puesta en funcionamiento
- Manejo y funcionamiento
- Limpieza y cuidado
- Desecho
- Bezpiecze ń stwo
- Budowa i dzia ł anie
- Uruchamianie
- Obs ł uga
- Czyszczenie i piel ę gnacja
- Utylizacja
- Правила техники безопасности
- Конструкция и эксплуатация
- Ввод в эксплуатацию
- Эксплуатация. Управление
- Чистка и уход
- Утилизация