Fagor CA-90CI: 4. ASSEMBLY

8

4. ASSEMBLY

Fit the two parts of the base

 (3)

 together as 

shown in 

Fig. 2

. Thread the cable through 

the central hole in the base. Align the screw 

holes on the base with those of the fan. 

Then insert the screws and tighten them 

(Fig. 3)

.

Position the cable in the groove on the 

base 

(Fig. 4)

.

appliance come into contact or near hot 

surfaces (kitchen gas or electric hobs or 

ovens).

•

  Do not use detergents or abrasive 

sponges to clean the appliance. 

•

  Do not touch the hot surfaces. Use the 

handles.

•

  Do not let the cable come into contact 

with the hot parts of the appliance.

•

  Do not cover the cord, for example with 

a rug or similar. Place the cord far away 

from any walk way or anywhere where 

people might trip over it.

•

  In order to ensure the air grille does not 

become blocked, keep the fan at least 

20 cm away from the wall.

•

  Do not place the fan beneath curtains 

or similar.

•

  Do not introduce any objects into the 

grille.

•

  Do not leave the appliance next to any 

focus of heat or on hot surfaces.

•

  Do not direct the flow of air directly 

towards babies or ill persons.

•  This appliance should not be used 

by physically, sensorially or mentally 

handicapped people or people without 

experience or knowledge of it (including 

children), unless they are supervised or 

instructed in the use of the appliance 

by a person responsible for their safety.

•  Children should be watched to ensure 

they do not play with the appliance.

•  For greater protection, we recommend 

installing a residual current device 

(RCD) with an operational residual 

current not exceeding 30 mA. Ask your 

installer for advice.

5. OPERATION

Before operating the fan, place it on a flat, 

stable surface. 

The fan may be controlled using the 

buttons on the control panel or the remote 

control as it has the same functions. 

Switching the fan on and off: 

Press 

the On/Off button

 (5) 

on the control 

panel or on the remote control, to 

start up the fan. Press this button 

again to switch it off.

 Speed setting: 

Press the speed 

setting button 

(6)

 to select the air flow 

rate. When you switch on the fan the 

set speed will be “low”. Press the 

button once to set a “medium speed, 

twice for “high” speed, and three 

times to return to “low” speed.

According to the speed you have selected, 

the light indicator corresponding to this 

speed will light up. 

 Ventilation type: 

When you switch on the fan, “normal” 

mode (a). 

The fan will run continuously at the speed 

selected. Press the 

button once to set 

“natural” mode (b) and twice to set “night” 

mode (c). If you wish to return to “normal” 

mode, press the ventilation type setting 

button a third time

 (7)

. The light indicator 

for  each time of ventilation will light up.

  Oscillation: 

Press the oscillation 

button 

(8) 

to make the fan oscillate 

horizontally and thereby cool larger 

spaces more efficiently. If you wish to 

stop oscillation, press the same button 

again.

  Timer: 

This fan has a timer with a 

range of 1 - 12 hours 

(g)

. You may 

programme the fan to switch off 

automatically after the functioning time 

set.

Press the timer button 

(9)

 to set the 

time. Each time you press the button