Fagor CA-80C: 4. ASSEMBLY 5. OPERATION

9

4. ASSEMBLY 5. OPERATION

Before operating the fan, place it on a flat, 

stable surface. 

The fan may be controlled using the 

buttons on the control panel or the remote 

control as it has the same functions. 

 Switching the fan on and off: 

Press 

the On/Off button

 (8) 

on the control 

panel or on the remote control, to 

start up the fan. Press this button 

again to switch it off.

 Speed setting: 

Press the speed 

setting button 

(9)

 to select the air 

flow rate. When you switch on the fan 

the set speed will be “low” (I). Press 

the button once to set a “medium (II) 

speed, twice for “high” speed (III), and 

three times to return to “low” speed 

(I).

|

➞

Low speed

||

➞

Medium speed

|||

➞

High speed

According to the speed you have selected, 

the light indicator corresponding to this 

speed will light up. 

MODE Ventilation type: 

When you switch on the fan, “normal” 

mode (

). 

The fan will run continuously at the speed 

selected. Press the MODE button once to 

set “natural” mode (

) and twice to set 

“night” mode (

). To return to “normal” 

mode, press the MODE button 

(10)

 a third 

time. The indicator light for each ventilation 

type will light up. 

 Oscillation: 

Press the oscillation 

button 

(6) 

to make the fan oscillate 

horizontally and thereby cool larger 

spaces more efficiently. If you wish to 

stop oscillation, press the same button 

again.

 Timer: 

Pres the timer button 

(7)

 if you 

wish to select an operating period 

A. 

Fit the two parts of the base column 

(3)

together as shown in 

Fig. 2

. Thread the 

cable through the central hole and align 

the screw holes on the base column 

(3)

 with those of the fan. Then insert 

the screws and tighten them with a 

screwdriver

 (Fig. 3)

.

B. 

Fit the two parts of the base 

(4)

 together 

as shown in 

Fig. 4

. Thread the cable 

through the central hole in the base. 

Align the screw holes on the base with 

those of the fan. Then insert the screws 

and tighten them with a screwdriver. 

(Fig. 5)

C. 

Position the cable in the groove on the 

base 

(Fig. 6)

.

•

  Do not cover the cord, for example with 

a rug or similar. Place the cord far away 

from any walk way or anywhere where 

people might trip over it.

•

  In order to ensure the air grille does not 

become blocked, keep the fan at least 

20 cm away from the wall.

•

  Do not place the fan beneath curtains 

or similar.

•

  Do not introduce any objects into the 

grille.

•

  Do not leave the appliance next to any 

focus of heat or on hot surfaces.

•

  Do not direct the flow of air directly 

towards babies or ill persons.

•  This appliance should not be used 

by physically, sensorially or mentally 

handicapped people or people without 

experience or knowledge of it (including 

children), unless they are supervised or 

instructed in the use of the appliance 

by a person responsible for their safety.

•  Children should be watched to ensure 

they do not play with the appliance.

•  For greater protection, we recommend 

installing a residual current device 

(RCD) with an operational residual 

current not exceeding 30 mA. Ask your 

installer for advice.