Fagor IP-400B: 6. CLEANING AND MAINTENANCE

13

the selection has been made the value 

will stop flashing on the display. 

•

  If the display is in the temperature 

display mode

 (9)

 or in the automatic 

shut off timer mode

 (10)

, first use the 

Menu button

 (7) 

to switch the display 

to the power level display mode 

(8) 

and 

then set the desired power level.

•

  If during cooking you again use the 

Menu button to switch to the power 

level display mode, the value “P-6” will 

appear on the display.

SETTING THE TEMPERATURE (9)

•

  Using the Menu button 

(7)

 switch the 

display to the temperature  display 

mode 

(9)

. The cooking temperature is 

automatically set to 140°C. Use the 

control dial 

(4)

 to select the desired 

cooking temperature in the range 

60–220 °C. During this selection the 

value flashes on the display. After the 

selection has been made the value will 

stop flashing on the display. 

•

  If during cooking you again use the 

Menu button

 (7) 

to switch to the 

temperature display mode, the value 

140 °C will appear on the display. 

SETTING THE AUTOMATIC SHUT-OFF 

TIMER (10)

•

  Using the Menu button

 (7) 

switch the 

display to the timer display mode 

(10)

. Using the control dial

 (4)

 set the 

automatic shut off time in the range 

0–180 minutes. Slowly turn the control 

dial 

(4)

 to increase or decrease the 

automatic shut off time by 1 minute. 

Quickly turn the control dial to increase 

or decrease the automatic shut off time 

by 10 minute intervals. 

•

  As soon as you set the timer, the value 

on the display will stop flashing and 

will start to countdown the time to the 

automatic shut off. Until the automatic  

shut off of the  induction hotplate, the 

remaining time until automatic shut off 

and the set power level or temperature 

will alternate on the display.

•

  At the end of the set automatic shut off 

time a sound is made and the induction 

hotplate turn itself off. The value "0" 

flashes on the display and the induction 

hotplate is in the stand-by mode.

•

  If you do not set the automatic shut off 

time, the value "---" will stop flashing 

and the display will switch to the mode 

showing power and temperature.

TURNING OFF THE INDUCTION 

HOTPLATE

Turn off the induction hotplate by pressing 

the   button 

(6)

. The value "0" will flash on 

the display and the induction hotplate will 

be in stand-by mode. 

Note:

 After being turned off the fan will 

start for a short time to speed up the 

cooling of the induction hotplate. Do not 

disconnect the induction hotplate until the 

fan stops working.

6. CLEANING AND MAINTENANCE 

1.

  Unplug the appliance and allow the hob 

to cool down.

2.

  Use a soft dry cloth to gently remove 

any dust that has accumulated in the air 

vent and air inlet.

3.

  If the hob is not excessively dirty, clean 

it with a damp cloth.

4.

  If there are grease stains on the hob, 

clean it with a damp cloth and a little 

toothpaste or neutral detergent. 

5.

  Never use abrasive or degreasing 

cleaning agents or alcohol.