Fagor CA-80: 4. ASSEMBLY 5. OPERATION

8

4. ASSEMBLY 5. OPERATION

Before operating the fan, place it on a flat, 

stable surface. 

Place the timer 

(2)

 in the off position (“0”) 

and plug in the appliance.

•

  Switch on the appliance by turning the 

timer 

(2)

 to the on position (“I”). 

•

  Select the desired speed by turning 

the speed adjustment selector dial 

(1)

clockwise. If you want the fan to oscillate, 

turn the selector dial anti-clockwise. 

  “0” = off

  “1” = low speed

A.

  Fit the two parts of the base column

 (4) 

together as shown in 

Fig. 2

. Thread the 

cable through the central hole and align 

the screw holes on the base column 

(4)

 with those of the fan. Then insert 

the screws and tighten them with a 

screwdriver

 (Fig. 3)

.

B.

  Fit the two parts of the base 

(5)

 together 

as shown in 

Fig. 4

. Thread the cable 

through the central hole in the base. Align 

the screw holes on the base with those 

of the fan. Then insert the screws and 

tighten them with a screwdriver. 

(Fig. 5) 

C.

 Position the cable in the groove on the 

base

 (Fig. 6)

.

•

  Do not place the fan beneath curtains or 

similar.

•

  Do not introduce any objects into the 

grille.

•

  Do not leave the appliance next to any 

focus of heat or on hot surfaces.

•

  Do not direct the flow of air directly 

towards babies or ill persons. 

•

  This appliance should not be used 

by physically, sensorially or mentally 

handicapped people or people without 

experience or knowledge of it (including 

children), unless they are supervised or 

instructed in the use of the appliance by 

a person responsible for their safety.

•   Children should be watched to ensure 

they do not play with the appliance.

7. INFORMATION FOR THE CORRECT  DISPOSAL OF ELECTRICAL AND  ELECTRONIC APPLIANCES

At the end of its working 

life, the product must not be 

disposed of as urban waste. 

It must be taken to a special 

local authority differentiated 

waste collection centre or to a 

dealer providing this service. 

Disposing of a household appliance separately 

avoids possible negative consequences for 

the environment and health deriving from 

inappropriate disposal and enables the 

constituent materials to be recovered to obtain 

significant savings in energy and resources. 

To remind you that you must collaborate with a 

selective collection scheme, the symbol shown 

appears on the product warning you not to 

dispose of it in traditional refuse containers.

For further information, contact your local 

authority or the shop where you bought the 

product.

6. CLEANING

Before carrying out any cleaning or 

maintenance operations, switch off all the 

controls and unplug the appliance. Use 

a soft, slightly damp cloth to clean the 

outside of the fan. Do not allow water into 

the engine during cleaning. Do not immerse 

the appliance in water. Do not use solvents, 

abrasive products, or any other chemical 

product to clean the fan.

  “2” = medium speed

  “3” = high speed

•

  If you wish to select a period of 

operation, set the desired time by 

turning the timer control 

(2) 

clockwise 

to the desired time within a range of 

0 to 120 minutes (2 hours). Once the 

selected time has passed, the fan will go 

off automatically. 

•

  To disconnect the fan, switch all the 

controls to Off (speed and timer) and 

unplug the appliance.