Petzl NAVAHO SIT FAST: E

E: Petzl NAVAHO SIT FAST

E

Diagram 4. Preparation

To attach the chest harness to the seat harness, pass the dorsal strap

through the rear chest-seat joining buckle (9), then through the elastic

retainer. Then thread the strap through the adjustment buckle for the dorsal

adjustment (2), then again through the elastic retainer.

1. 2.

3. 4.

NAVAHO SIT or NAVAHO SIT FAST + TOP

F

Diagram 5. How to put the harness on

Open the buckles on the leg loops.

5A. Putting the shoulder

5C. Fasten and adjust the leg loops.

straps off to one side, hold

- NAVAHO SIT: DoubleBack buckles.

the seat harness by the belt,

5B. Adjust the belt by pulling on the belt straps. Stow

- NAVAHO SIT FAST: Fasten the FAST buckles. Be careful of foreign

5D. Position the shoulder straps on the shoulders. Put the connector in the

put your legs through the belt

the excess webbing neatly using the strap retainers

bodies which can impede the operation of the FAST buckles (such as

ventral point (textile) connecting the chest harness to the seat harness (5).

and pull it up to your waist.

(flat against the waist belt).

pebbles, sand, clothing...). Check for correct locking.

Lock the connector by turning the locking sleeve.

5A. 5B. 5C. 5D.

- Short ends: use the retainers

in front of the adjustment buckles.

- Long ends: pass them through

the lateral rings then through the

retainers behind the rings.

F

5F. Initial dorsal adjustment

Adjustment and

This adjustment should be done

suspension test

only once when putting on your

Your harness must be

harness for the first time. Have

adjusted to fit snugly to

another person help you do it.

reduce the risk of injury in

Slide the strap retainer so that

case of a fall.

both layers of webbing are

You must move around

taut between the two buckles,

and hang in the harness

(2) and (9) (no slack).

(suspension test) from

Be sure to neatly stow the excess

each attachment point

5E. Adjust the shoulder straps. Stow the excess webbing

webbing (flat - no loops of slack)

with your equipment to

using the strap retainer on the shoulder strap.

in the strap retainer so that it

verify that the harness

doesn’t interfere with your work.

fits properly, provides

Adjust the position to suit your

adequate comfort for the

5E.

individual body shape and size,

intended use and that it is

position the DoubleBack buckle at

optimally adjusted.

the level of the shoulder blades.

5F.

5

NAVAHO SIT / NAVAHO SIT FAST / TOP / TOP CROLL C79502-C (200907)

Class T

19 mm

Diagram 6. Manual locking oval directional

connector

This EN 362: 2004

connector, a component

of the harness, is a

connecting element for

linking the chest harness

to the seat harness. Do not

use it to attach a lanyard

or energy absorber.

6A. ATTENTION DANGER,

the connector must always

be used with the gate

closed and locked. The

strength of the connector

is greatly reduced if the

gate is open.

Systematically verify the

gate is closed by pressing

it with your hand.

6B. The connector (closed)

is strongest when loaded

on its major axis. Any

other position reduces its

strength.

Class T

19 mm

G

6A.

6B.