Dell Precision T5400 (Late 2007): Dell Diagnostics Starting the Dell Diagnostics From Your Hard Drive

Dell Diagnostics Starting the Dell Diagnostics From Your Hard Drive: Dell Precision T5400 (Late 2007)

Table of contents

Windows Vista:

1

Click the Windows Vista start button , and click

Help and Support

.

2

Ty p e

hardware troubleshooter

in the search field and press

<Enter> to start the search.

3

In the search results, select the option that best describes the problem and

follow the remaining troubleshooting steps.

Dell Diagnostics

CAUTION: Before you begin any of the procedures in this section, follow the

safety instructions in the

Product Information Guide

.

If you experience a problem with your computer, perform the checks in

"Lockups and Software Problems" on page 45 and run the Dell Diagnostics

before you contact Dell for technical assistance.

Dell recommends that you print these procedures before you begin.

NOTICE: The Dell Diagnostics works only on Dell™ computers.

NOTE: The Drivers and Utilities disc is optional and may not ship with your computer.

Enter system setup (see "System Setup" in your User’s Guide), review your

computer’s configuration information, and ensure that the device you want

to test displays in system setup and is active.

Start the Dell Diagnostics from either your hard drive or from the Drivers and

Utilities disc.

Starting the Dell Diagnostics From Your Hard Drive

1

Turn on (or restart) your computer.

2

When the DELL™ logo appears, press <F12> immediately.

NOTE: If you see a message stating that no diagnostics utility partition has been

found, run the Dell Diagnostics from your Drivers and Utilities disc. See "Starting the

Dell Diagnostics From the Drivers and Utilities Disc" on page 37.

If you wait too long and the operating system logo appears, continue to

®

®

wait until you see the Microsoft

Windows

desktop. Then shut down

your computer (see "Turning Off Your Computer" in your

User’s Guide

),

and try again.

36 Quick Reference Guide