Dell PowerVault ML6000: Powering On the Library

Dell PowerVault ML6000 Getting Started Guide

23

Powering On the Library

1

Turn on each power supply’s power switch. 

2

Turn on the library’s main power using the power button located on the 

front of the 5U Library Control Module. 

The Setup Wizard screen appears on the operator panel when the library 

has completed its power-on self-test (POST) and initialization. This 

process takes approximately 30 minutes. Do not power off the library 

during this process.

1

Module terminator

2

Ethernet cable connected to Gigabit 

Ethernet port

3

Module-to-module cable

4

Power cords

EMEA1.book  Page 23  Tuesday, March 9, 2010  4:38 PM