Sharp PN-H801: Turning Power On/Off

Turning Power On/Off

Caution

ENGLISH

Turning power on/off

• Turn on the monitor rst before turning on the PC or

Press the POWER button or the POWER switch to turn the

playback device.

power ON/OFF.

Turning on the main power

Main power switch

Power switch Power LED

Status Status of the monitor

Green lit Power on

Orange lit Power off (Standby mode)

Caution

• The main power must be turned on/off with the main power

Accessing the operation panel

switch. Do not connect/disconnect the power cord or turn

the breaker on/off while the main power switch is on.

• When turning the power off and back on, always wait for at

least 5 seconds.

• For a complete electrical disconnection, pull out the main

plug.

n

Operation mode

When the monitor is turned on for the rst time after being

shipped from the factory, the operation mode setting screen

will be displayed. Set it to MODE1 or MODE2.

MODE1 ... OFF IF NO OPERATION is set to ON, and

POWER SAVE MODE is set to ON. (These settings

can not be changed.)

If there is no operation for 4 hours or more, the

monitor automatically enters standby mode. Power

consumption in standby mode is also minimized.

MODE2 ... Will perform standard operation.

OFF IF NO OPERATION is set to OFF, and

POWER SAVE MODE is set to ON. These settings

can be changed.

Even after being set, changes can be made using

OPERATION MODE, located in the menu of the monitor. (See

OPERATION MANUAL.)

7

E