Dell PowerEdge R415: Power Physical
Power Physical: Dell PowerEdge R415
Table of contents
- Notes, Cautions, and Warnings
- Installation and Configuration Unpacking the System Installing the Rails and System in a Rack
- Optional – Connecting the Keyboard, Mouse, and Monitor Connecting the Power Cable(s)
- Installing the Power Cord Retention Bracket Turning On the System
- Installing the Optional Bezel Complete the Operating System Setup Supported Operating Systems
- Other Information You May Need
- Obtaining Technical Assistance Technical Specifications Processor Expansion Bus Memory
- Drives Connectors Video
- Power Physical
- Environmental
- Environmental (continued)
Power
AC power supply (per power supply)
Wa tt ag e
480 W (non-redundant power supply)
500 W (redundant power supply)
Voltage
100-240 VAC, 50/60 Hz, 7.5-3.8 A
(non-redundant power supply)
100-240 VAC, 50/60 Hz, 7-3.5 A
(redundant power supply)
Heat dissipation
1637 BTU/hr maximum
(non-redundant power supply)
1706 BTU/hr maximum
(redundant power supply)
Maximum inrush current
Under typical line conditions and over
the entire system ambient operating range,
the inrush current may reach 25 A per power
supply for 10 ms or less.
Batteries
System battery
CR 2032 3.0-V lithium coin cell
Physical
Height 4.3 cm (1.69")
Width 43.4 cm (17.09")
Depth 62.7 cm (24.69")
Weight (maximum configuration) 15.9 kg (35.02 lb)
Weight (empty) 5.96 kg (13.12 lb)
10 Getting Started With Your System
