Dell PowerEdge C410X: NOM Information (Mexico Only) Technical Specifications System Specifications 1. Chassis
NOM Information (Mexico Only) Technical Specifications System Specifications 1. Chassis: Dell PowerEdge C410X
Table of contents
- Notes, Cautions, and Warnings
- Restricted Access Location Installation and Configuration Unpack your system
- Installing the Rails and System in a Rack
- Follow these instructions to install the rails into a rack: 3. Push the system into the sliding rails until the locking latch clicks into place.
- 4. Install the system into the rack.
- Connecting iPass Cables Connecting Power Cables
- Turning On the System Other Information You May Need Firmware Updates
- NOM Information (Mexico Only) Technical Specifications System Specifications 1. Chassis
- 2. Front I/O Board 3. FAN Module 4. Power Supply BTU Specifications
- Environmental Specifications
NOM Information (Mexico Only)
The following information is provided on the device described in this document in compliance with the
requirements of the official Mexican standards (NOM):
Importer: Dell Inc. de México, S.A. de C.V
Paseo de la Reforma 2620-11° Piso
Col. Lomas Altas
11950 México, D.F.
Model Number: B02S
Supply voltage: 200-240 VCA
Frequency: 50/60 Hz
Current Consumption 9.6 A (for each power inlet)
Technical Specifications
System Specifications
1. Chassis
Form Factor
3U
L = 750mm
Size (LxWxH)
W = 440mm
H = 130.5mm
Total of 16 PCI Express individual modules per chassis.
Servicing one module does not affect other modules in the chassis.
PCI Card Access
(F/R/I)
Front of Chassis = 10 Modules
Back of Chassis = 6 Modules
Eight 92 mm x 38 mm
N+1 Redundancy
Fans
Hot Swappable Fans
BMC notification of system fan failure
Removal or insertion of PCI Module does not require any change in operation of the
Serviceability
chassis or other PCI Modules installed within the chassis.
LED Indicators
Power LED, System Status LED, ID LED, Fan LED
9
