Dell PowerEdge C5220: 1 2 3

1

Pull on the latch release buttons on the end piece midpoints to open the

rail latches.

2

Align the end pieces of the rails on the vertical rack flanges to seat the pegs

in the bottom hole of the first U and the top hole of the second U. Engage

the back end of the rail until the latch locks in place.

NOTE: The rails can be used in both square-hole and round-hole racks.

Back

Front

3

Repeat steps 1 to 2 to position and seat the front end piece on the vertical

flange.

NOTE: To remove the rails, pull on the latch release button on the end piece

midpoint and unseat each rail.

4 Installation and Configuration