Beurer BM 65: 10. Specifications Technical alarm – description 9. Cleaning and storing the instrument
10. Specifications Technical alarm – description 9. Cleaning and storing the instrument: Beurer BM 65
Table of contents
- 2. Important information Signs and symbols 1. Getting to know your instrument
- Advice on use
- Storage and Care Advice on batteries
- 3. Unit description Repair and disposal
- Icons in the display: System requirements for the Beurer “Health Manager” computer software 1. Supported operating systems: 2. Supported architectures: 3. Hardware requirements:
- 4. Prepare measurement Setting date and time Inserting battery Operation with the mains part
- 5. Measuring blood pressure Positioning cuff
- Correct posture Measuring blood pressure
- 6. Evaluating results Cardiac arrhythmia: WHO classification: Range of blood pressure values Systolic
- 8. Error messages/trouble-shooting 7. Saving, retrieving and deleting results
- 10. Specifications Technical alarm – description 9. Cleaning and storing the instrument
- Technical information is subject to change without notifica- tion to allow for updates.
- 11. Adapter
10. Specifications
Technical alarm – description
Should the recorded blood pressure (systolic or diastolic)
Model no. BM 65
lie outside the limits specified in the section “Technical
Measurement
Oscillometric, non-invasive blood pres-
specifications”, the technical alarm will appear on the dis-
method
sure measurement on the upper arm
play indicating either “
” or “ ”. In such cases, you should
Measurement
Cuff pressure 0 – 300 mmHg,
seek medical assistance and check the accuracy of your
range
systolic 60 – 260 mmHg,
procedure.
diastolic 40 –199 mmHg,
The limit values for the technical alarm are factory set and
Pulse 40 –180 beats/minute
cannot be adjusted or deactivated. These alarm limit values
Display accuracy Systolic ± 3 mmHg,
are accorded second priority under the standard IEC 60601-
diastolic ± 3 mmHg,
1-8.
pulse ± 5 % of the value shown
The technical alarm is a non-locking alarm and must not be
reset. The signal shown on the display will disappear auto-
Measurement inac-
Max. permissible standard deviation
matically after about 8 seconds.
curacy
according to clinical testing:
systolic 8 mmHg /diastolic 8 mmHg
9. Cleaning and storing the instrument
Memory 10 x 30 memory spaces
•
Clean your blood pressure computer carefully only with a
Dimensions L 240 mm x W 120 mm x H 50 mm
slightly moistened cloth.
•
Do not use detergents or solvents.
Weight Approx. 419 g (without batteries)
•
On no account must you immerse the computer in water,
Cuff size 22 – 30 cm / 30 – 42 cm
otherwise liquid can enter it and cause demage.
Permissible operat-
+10 °C to +40 °C, ≤ 90 % relative air
•
When storing the device, make sure that no heavy objects
ing conditions
humidity (non-condensing)
are placed on top of it. Remove the batteries. The cuff
Permissible storage
-20 °C to +55 °C, ≤ 90 % relative air
tube should not have any sharp kinks.
conditions
humidity, 800 –1050 hPa ambient
pressure
26
