Beurer BM 45: 5. Measuring blood pressure 5.1 Positioning cuff 5.2 Correct posture
5. Measuring blood pressure 5.1 Positioning cuff 5.2 Correct posture: Beurer BM 45
Table of contents
- 1. Getting to know your instrument
- 2. Important information Signs and symbols Advice on use
- Storage and Care Advice on batteries
- 3. Device description Repair and disposal
- Information on the display: 4. Preparing the measurement Inserting the batteries Setting the hour format, date and time
- Operation with the mains part
- 5. Measuring blood pressure 5.1 Positioning cuff 5.2 Correct posture
- Performing the blood pressure measurement 6. Evaluating results Cardiac arrhythmia:
- WHO classification: Range of blood pressure values Systolic (in mmHg) Diastolic (in mmHg) Measure 7. Displaying and deleting measurements
- 8. Cleaning and storing the instrument
- 10. Specifications 9. Rectifying faults
- 11. Mains part

5. Measuring blood pressure
If the measurement is performed on the right upper arm,
the line should be located on the inside of your elbow. En-
Please ensure the device is at room temperature before meas-
sure that your arm is not pressing on the line.
uring.
The measurement can be performed on the left or right arm.
Blood pressure may vary between the right and left arm, which
may mean that the measured blood pressure values are differ-
5.1 Positioning cuff
ent. Always perform the measurement on the same arm.
Fit the cuff round your bare left upper
If the values between the two arms are significantly different,
arm. Blood circulation in the arm
please consult your doctor to determine which arm should be
should not be restricted by tight
used for the measurement.
clothing or other objects.
Important: The unit may only be operated with the original cuff.
The cuff is suitable for an arm circumference of 22 to 36 cm.
The cuff should be placed on the
A larger cuff for upper-arm circumferences of 35 to 44 cm can
upper arm so that the lower edge is
be obtained from specialist retailers or from the service ad-
2 to 3 cm above the bend of the elbow
dress using order number 163.387.
and above the artery. The tube should
be in line with the centre of the palm.
5.2 Correct posture
Now place the free end of the cuff
snugly, but not too tightly, around the
arm, and fix it with the Velcro fastener.
The cuff should be fitted tight enough
to allow just two fingers to fit beneath
the cuff.
•
Rest for approx. 5 minutes before each measurement. Other-
Insert the cuff tubing into the socket
wise there may be divergences.
for the cuff attachment.
•
You can perform the measurement either sitting or lying down.
Always make sure that the cuff is on a level with your heart.
•
To carry out a blood pressure measurement, make sure you are
sitting comfortably with your arms and back leaning on some-
thing. Do not cross your legs. Place your feet flat on the ground.
22

