Dell PowerVault MD3000i: Power Supplies Available Physical Disk Power (Per Slot) Physical Environmental (Enclosure)
Power Supplies Available Physical Disk Power (Per Slot) Physical Environmental (Enclosure): Dell PowerVault MD3000i
Table of contents
- Notes, Notices, and Cautions
- System Features Performance Features Scalability Features Availability Features
- Manageability and Serviceability Features Supported Operating Systems Other Information You May Need
- Obtaining Technical Assistance Installation Unpack the System
- Install the Rails and System in a Rack
- Connect the Power Cables and Power Cord Retention Bracket
- Cable the RAID controller modules according to the instructions provided in the Hardware Owner’s Manual
- Turn on the System
- Specifications Disks RAID Controller Modules RAID Controller Back-Panel Connectors
- Backplane Board LED Indicators
- Power Supplies Available Physical Disk Power (Per Slot) Physical Environmental (Enclosure)
- Environmental (Battery Backup Unit [BBU])

Power Supplies
Wattage 488 W maximum continuous; 550 W
peak
Voltage 100–240 V rated (actual 90–264 V)
Frequency 47–63 Hz
Amperage 7.2 A at 100 V, 3.6 A at 200 V
Available Physical Disk Power (Per Slot)
Supported physical-disk power
up to 1.3 A at +12 V
consumption
up to 1.5 A at +5 V
Physical
Height 13.11 cm (5.16 in)
Width 44.63 cm (17.57 in)
Depth 48.01 cm (18.9 in)
Weight (maximum configuration) 35.37 kg (78 lb)
Environmental (Enclosure)
NOTE: For additional information about environmental measurements for specific
system configurations, see dell.com/environmental_datasheets
Temperature
Operating
10° to 35°C (50° to 95°F)
Storage
–40° to 65°C (–40° to 149°F)
Relative humidity
Operating
5% to 80% (noncondensing)
Storage
5% to 95% (noncondensing)
Altitude
Operating
–16 to 3048 m (–50 to 10,000 ft)
Storage
–16 to 10,600 m (–50 to 35,000 ft)
BTU per hour 1430 (maximum)
12 Getting Started With Your System

