Dell PowerVault MD3000i: Cable the RAID controller modules according to the instructions provided in the Hardware Owner’s Manual
Cable the RAID controller modules according to the instructions provided in the Hardware Owner’s Manual: Dell PowerVault MD3000i
Table of contents
- Notes, Notices, and Cautions
- System Features Performance Features Scalability Features Availability Features
- Manageability and Serviceability Features Supported Operating Systems Other Information You May Need
- Obtaining Technical Assistance Installation Unpack the System
- Install the Rails and System in a Rack
- Connect the Power Cables and Power Cord Retention Bracket
- Cable the RAID controller modules according to the instructions provided in the Hardware Owner’s Manual
- Turn on the System
- Specifications Disks RAID Controller Modules RAID Controller Back-Panel Connectors
- Backplane Board LED Indicators
- Power Supplies Available Physical Disk Power (Per Slot) Physical Environmental (Enclosure)
- Environmental (Battery Backup Unit [BBU])
Plug the other end of the power cables into a grounded electrical outlet
or a separate power source such as
an uninterruptible po
wer supply (UPS)
or a power distribution unit (PDU).
Cable the RAID controller modules according to the instructions provided
in the
Hardware Owner’s Manual
.
8 Getting Started With Your System
Top 10 manuals
100.00
NZXT HALE90 1000W99.99
Samsung SM-R38099.97
AEG BSB 18C99.97
Dell 2700W99.97
Smeg KSEC70X99.96
Beurer HDE 4099.96
Pyramida KH 50 v.299.96
MSI CSM-H81M-P3299.96
AEG HR 562799.95
Melissa 640-048