Dell PowerEdge T105: System Features

System Features

This section describes the major hardware and software features of your

system. It also provides information about other documents you may need

when setting up your system and how to obtain technical assistance.

• One dual-core or quad-core AMD™ Opteron™ 1000 processor or AMD

Sempron™ with ECC processor (when available).

NOTE: Use the System Setup program to view processor information.

See the Hardware Owner’s Manual.

• A minimum of 512 MB of 667- or 800-MHz DDR II SDRAM memory,

upgradable to a maximum of 8 GB DDR II SDRAM memory by installing

512-MB, 1-GB, or 2-GB unbuffered ECC memory modules in the four

memory module sockets on the system board, single- or dual-rank.

• Support for the following internal hard-drive (non–hot-plug)

configurations:

– Up to two internal 3.5-inch SATA hard drives with an integrated SATA

controller

or

– Up to two internal 3.5-inch Serial-Attached SCSI (SAS) hard drives

with a SAS controller card

• One 3.5-inch peripheral drive bay for the optional diskette drive, and

two 5.25-inch bays for the following supported drives: DVD-ROM,

combination CD-RW/DVD, DVD-RW, or tape backup device.

NOTE: DVD devices are data only.

• Support for the following RAID volumes with an optional SAS RAID

controller card: simple, spanned, striped (RAID 0), and mirrored (RAID 1).

• Support for USB 2.0.

• A chassis intrusion alert.

Getting Started With Your System 5