Dell PowerEdge 300: System Features

Getting Started With Your System

3

System Features

The major hardware and software features of your system include:

•

1U/1S rack-mountable chassis with support for static rails and sliding rails.

NOTE: 

Use the System Setup program to view processor information. See 

"Using the System Setup Program" in your 

Hardware Owner’s Manual

.

•

One of the following processors:

–

Single Core Intel

®

 Celeron

®

 445 Processor

–

Dual-Core Intel Core™2 Duo E6305 or E6405 Processor

–

Quad-Core Intel Xeon

®

 X3323, X3353, or X3363 Processor

•

A minimum of 512-MB single or dual-ranked registered 667-MHz DDR2 

memory modules with ECC, upgradeable to a maximum of 24-GB by 

installing combinations of 512-MB, 1-GB, 2-GB, or 4-GB memory modules 

in six memory module sockets on the system board. 

•

One of the following riser card options:

–

Two riser cards (left and center risers), each providing a x8 lane width 

PCI-Express expansion slot.

OR

–

One riser card (center riser), providing a x8 lane width PCI-Express 

expansion slot.

–

One riser card (left riser) providing a 3.3 V, 64-bit 133MHz PCI-X 

expansion slot.

•

One 12.7 mm DVD, or combination CD-RW/DVD in a device drive bay.

•

Support for the following internal hard-drive configurations:

–

Up to two 3.5-inch, internal, SATA hard drives with the optional SAS 

controller card (hot-plug option available).

–

Up to two 3.5-inch, internal, Serial-Attached SCSI (SAS) hard drives 

with an optional SAS controller card (hot-plug option available).