Dell PowerEdge 1950: Connectors Video Power Physical
Connectors Video Power Physical: Dell PowerEdge 1950
Table of contents
- Notes, Notices, and Cautions
- System Features
- Supported Operating Systems Other Information You May Need
- Obtaining Technical Assistance Installation and Configuration Unpacking the System
- Installing the Rail and System in a Rack Connecting the Keyboard, Mouse, and Monitor
- Connecting the Power Installing the Power Cord Retention Bracket (Optional)
- Turning on the System Installing the Bezel
- Complete the 0perating System Setup Technical Specifications Processor Expansion Bus Memory Drives
- Connectors Video Power Physical
- Environmental
Connectors
Back
NIC
Two RJ-45 (for integrated 1-GB NICs)
Serial
9-pin, DTE, 16550-compatible
USB Two 4 pin, USB 2.0 compliant
Video
15-pin VGA
Front
Video
15 pin-VGA
USB
Two 4 pin, USB 2.0 compliant
Video
Video type ATI ES1000 video controller; VGA connector
Video memory 16 MB of DDR SDRAM
Power
AC power supply (per power supply)
Wattage
670 W
Voltage
90–264 VAC, autoranging, 47-63 Hz, 10.0 A (at 90 VAC)
Heat dissipation
2697 BTU/hr (maximum)
Maximum inrush current
Under typical line conditions and over the entire system
ambient operating range, the inrush current may reach 55 A
per power supply for 10 ms or less.
Batteries
System battery
CR 2032 3.0-V lithium ion coin cell
RAID battery (optional)
4.1-V lithium ion battery pack
Physical
Height 4.29 cm (1.69 in)
Width 48.26 cm (19 in)
Depth 76.2 cm (30 in)
Weight (maximum configuration) 17.69 kg (39 lb)
10 Getting Started With Your System
