Festool OF 2200 EB: CAUTION

14

the body leaves it unstable and may lead to loss 

of control.

-

Ensure that the router bit is seated fi rmly and 

that it runs perfectly. 

-

The clamping collet and locking nut must not 

show any signs of damage.

-

Only use tools that meet standard EN 847-1. All 

Festool routing tools fulfi l these requirements. 

-

The maximum rotational speed specifi ed on the 

tool must not be exceeded and the rotational 

speed range must be observed. 

-

Do not use cracked or deformed router bits. 

-

Do not clamp tools with an unsuitable shank di-

ameter in the clamping collet.

-

Wear suitable protection such as ear protection, 

safety goggles, a dust mask for work which gen-

erates dust, and protective gloves when working 

with raw materials and when changing tools.

-

Festool electric power tools should only be in-

stalled in work benches specially designed by 

Festool. 

The electric power tool may become 

unsafe and cause serious accident if installed 

in benches from other manufacturers or self-

manufactured work benches.

5.3 Emission levels

Noise levels are measured in accordance with EN 

60745: 

Sound pressure level  

L

PA

 = 87 dB(A) 

Noise level  

L

WA

 = 98 dB(A) 

Uncertainty  

K = 3 dB 

CAUTION

The noise produced during work can damage 

your hearing. 



Always use ear protection.

Overall vibration levels (vector sum for three direc-

tions) measured in accordance with EN 60745: 

Vibration emission level 

(3-axis)  

a

h

 < 2,5 m/s

2

Uncertainty  

K = 1,5 m/s²

The specifi ed emissions values (vibration, noise)

– are used to compare machines.

– They are also used for making preliminary 

estimates regarding vibration and noise loads 

during operation.

– They represent the primary applications of the 

power tool.

Increase possible for other applications, with 

other insertion tools or if not maintained adequat-

ely. Take note of idling and downtimes of machine!

6 Commissioning 

 WARNING 

Risk of accident if the machine is operated us-

ing unauthorised voltages or frequencies. 



The mains voltage and the frequency of the 

power source must correspond with the spec-

ifi cations on the machine’s name plate. 



In North America, only Festool machines with 

the voltage specifi cations 120 V/60 Hz may be 

used.

The switch [2.2] is an on/off switch. Press the side 

locking knob [2.1] to lock the switch for continu-

ous operation. Press the switch again to release 

the knob.

7 Adjustments 

 WARNING

Risk of accident, electric shock



Always pull the plug out of the socket before 

performing any type of work on the machine. 

7.1 Electronics

The OF 2200 EB features full-wave electronics 

with the following properties:

Smooth start-up

The electronically controlled smooth start-up 

function ensures that the machine starts up 

smoothly.

Speed control

You can regulate the rotational speed steplessly 

between 10000 and 22000 rpm using the adjust-

ing wheel [1.11]. This enables you to optimise the 

cutting speed to suit the respective material and 

routing tool: 

Routing tool diameter 

[mm] 

Rec

ommended

cutting mat

erial

Material

10 -30

30 - 50 50 - 89

Adjusting wheel setting

Hardwood

6 - 4

5 - 3

3 - 1

HW 

(HSS)

Softwood

6 - 5

6 - 4

5 - 3

HSS 

(HW)