Beurer FT 70: General notes
General notes: Beurer FT 70
Table of contents
- Contents Included in delivery
- 1. Signs and symbols 2. Notes Safety notes Notes on handling batteries
- General notes
- 3. Unit description Overview
- 4. Initial use 5. Setting the device
- 6. What you should know about using this thermometer
- 7. Measuring
- 8. Changing the batteries
- 9. Storage and maintenance
- 10. Disposal 11. Technical data
- 12. Trouble-shooting
Important:
•
Replace weak batteries before they discharge completely.
•
Leaking batteries may damage the device. If you do not intend to use the device for longer periods, remove the
batteries from the battery compartment.
•
If a battery has leaked, put on protective gloves and clean the battery compartment with a dry cloth.
General notes
•
Please read these instructions for use carefully and keep them for later use, be sure to make them accessible
to other users and observe the information they contain.
•
This thermometer is a sensitive electronic device. Handle it with care and do not subject it to any mechanical
impacts.
•
Do not expose the device to direct sunlight.
•
Check before each use that the lens is intact. If it is damaged, please contact your retailer or the service
address.
•
The thermometer is NOT waterproof. For this reason, direct contact with water or other liquids should be
avoided.
•
This device ist not intended for commercial or clinical use.
•
The FT70 thermometer is only designed for the measuring area on the human body stated in the instructions
for use.
•
The device is only intended for the purpose stated in these instructions for use.
•
After each use, clean the measuring tip with a soft cloth moistened with disinfectant.
•
The thermometer has been designed for practical use, but is not a substitute for a visit to the doctor.
•
Before each repair query, fi rst check the batteries and replace them if necessary.
19
