Beurer BC 60: 6. Calling up stored values 7. Cleaning and care 8. Rectifying faults

periods of rest. The precision of the results of the resting

Deleting saved values

blood pressure is reduced in these users. Like any medical

You can delete saved values individually or else you can

measurement method, the precision of the HSD diagnosis is

delete all of them.

limited and can lead to incorrect results in some cases. The

•

To delete individual values, first select the stored value

blood pressure measurements taken when the circulatory

you wish to delete and keep memory button M1 or M2

system was at rest represent particularly reliable results.

depressed. The display starts blinking. Keep holding

the button depressed until the display has completely

6. Calling up stored values

cleared.

You can call up values from the 2 user memories and dis-

•

To delete an entire user memory, you have to select the

play the averages.

appropriate user memory. The average is displayed and

•

Press the M1 or M2 memory buttons. Firstly, the average

indicated with “A”. Hold the memory button M1 or M2 de-

of all values stored in this user memory will be displayed.

pressed until the display starts blinking and keep the but-

This is denoted by the letter “A” in the display.

ton depressed until the display completely clears.

•

If you press the memory buttons again, further individual

measurements appear with WHO, cardiac arrythmia and

7. Cleaning and care

HSD. These individual values are numbered from 1 to 60.

•

Clean your blood pressure computer carefully using only a

The time and date are alternately displayed after 2.5 sec-

slightly moistened cloth.

onds.

•

Do not use any detergents or solvents.

•

If there are 60 individual values in the memory at the same

•

Never hold the instrument under water as otherwise liquid

time, the oldest value is deleted in order to make room for

can penetrate and damage the instrument.

the new value.

•

Never place any heavy objects on the instrument.

•

Use the start/stop button to turn off the device, or it

will turn off automatically after approx. 30 seconds.

8. Rectifying faults

E

rror messages can occur when

Tip: You can also use the 2 user memories to separately

•

you move or talk during the measurement (ERR 1, ERR 3),

store measurements – e.g. mornings and evenings.

•

inflation takes longer than 20 seconds (ERR 2),

•

device has not been inflated sufficiently despite reinflation

(ERR 2),

20