Dell Precision T3400 (Late 2007): Cleaning Your Computer Computer, Keyboard, and Monitor Mouse (Non-Optical)
Cleaning Your Computer Computer, Keyboard, and Monitor Mouse (Non-Optical): Dell Precision T3400 (Late 2007)
Table of contents
- Notes, Notices, and Cautions
- Contents
- 4 Contents
- Finding Information What Are You Looking For? Find It Here
- What Are You Looking For? Find It Here
- What Are You Looking For? Find It Here
- What Are You Looking For? Find It Here
- What Are You Looking For? Find It Here
- What Are You Looking For? Find It Here
- About Your Computer Front View (Tower Orientation) 4 lower 3.5-inch drive bay
- 9 power button Press to turn on the computer.
- 14 network link light The network link light is on when a good connection
- Back View (Tower Orientation)
- Front View (Desktop Orientation) 4 hard drive activity light
- 7 power button Press to turn on the computer.
- 12 network link light The network link light is on when a good connection
- Back View (Desktop Orientation)
- Back Panel Connectors 1 mouse connector Plug a PS/2 mouse into the green mouse connector. Turn off
- 8 Rear Dual USB 2.0 connectors (2)
- 11 keyboard connector Setting Up Your Computer Changing Between Tower and Desktop Orientations
- Switching From Tower to Desktop Orientation Switching From Desktop to Tower Orientation Installing Your Computer in an Enclosure
- • Leave 10.2 cm (4 in) minimum clearance on all vented sides of the computer to permit the airflow required for proper ventilation.
- • Do not install your computer in an enclosure that does not allow airflow.
- Transferring Information to a New Computer Microsoft Windows XP
- Files and Settings Transfer Wizard (With the Operating System Media)
- Files and Settings Transfer Wizard (Without the Operating System Media)
- TRANSFER DATA TO THE DESTINATION COMPUTER: Power Protection Devices
- Surge Protectors Line Conditioners Uninterruptible Power Supplies (UPS)
- Cleaning Your Computer Computer, Keyboard, and Monitor Mouse (Non-Optical)
- Floppy Drive CDs and DVDs Troubleshooting Tools Power Lights
- • Eliminate interference. Some possible causes of interference are:
- Diagnostic Lights Diagnostic Light Codes During POST Light Pattern Problem Description Suggested Resolution
- Light Pattern Problem Description Suggested Resolution
- Light Pattern Problem Description Suggested Resolution
- Light Pattern Problem Description Suggested Resolution
- Light Pattern Problem Description Suggested Resolution Beep Codes Code Cause
- Code Description Suggested Remedy
- Code Description Suggested Remedy System Messages
- NOT A BOOT DISKETTE —Insert a bootable floppy disk and restart your computer.
- Hardware Troubleshooter Dell Diagnostics When to Use the Dell Diagnostics
- Starting the Dell Diagnostics From Your Hard Drive
- Starting the Dell Diagnostics From the Drivers and Utilities Disc
- Dell Diagnostics Main Menu Option Function
- Tab Function Troubleshooting
- Battery Problems Drive Problems
- Optical drive problems Problems writing to an optical drive Hard drive problems
- E-Mail, Modem, and Internet Problems RUN THE MODEM DIAGNOSTIC TOOL — VERIFY THAT THE MODEM IS COMMUNICATING WITH WINDOWS —
- Error Messages
- IEEE 1394 Device Problems
- Keyboard Problems Lockups and Software Problems The computer does not start up The computer stops responding
- A program stops responding A program crashes repeatedly A program is designed for an earlier Windows operating system A solid blue screen appears
- Other software problems Memory Problems F YOU RECEIVE AN INSUFFICIENT MEMORY MESSAGE — IF YOU EXPERIENCE OTHER MEMORY PROBLEMS —
- Mouse Problems RESTART THE COMPUTER — TEST THE MOUSE — Connect a properly working mouse to the computer, then try C HECK THE MOUSE SETTINGS — REINSTALL THE MOUSE DRIVER — See "Drivers" in your User’s Guide. R UN THE HARDWARE TROUBLESHOOTER — See "Hardware Troubleshooter" on
- Network Problems Power Problems
- Printer Problems
- Scanner Problems
- Sound and Speaker Problems
- Video and Monitor Problems The screen is blank
- The screen is difficult to read 3D image quality is poor Only part of the screen is readable
Cleaning Your Computer
CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions in the
Product Information Guide
.
Computer, Keyboard, and Monitor
CAUTION: Before you clean your computer, disconnect the computer from the
electrical outlet. Clean your computer with a soft cloth dampened with water. Do
not use liquid or aerosol cleaners, which may contain flammable substances.
• Use a vacuum cleaner with a brush attachment to gently remove dust from
the slots and holes on your computer and from between the keys on the
keyboard.
NOTICE: Do not wipe the display screen with a soap or alcohol solution. Doing so
may damage the antiglare coating.
• To clean your monitor screen, lightly dampen a soft, clean cloth with water.
If possible, use a special screen-cleaning tissue or solution suitable for the
monitor’s antistatic coating.
• Wipe the keyboard, computer, and plastic part of the monitor with a soft
cleaning cloth moistened with water.
Do not soak the cloth or let water drip inside your computer or keyboard.
Mouse (Non-Optical)
1
Turn the retainer ring on the underside of your mouse counterclockwise,
and then remove the ball.
2
Wipe the ball with a clean, lint-free cloth.
3
Blow carefully into the ball cage to dislodge dust and lint.
4
Clean the rollers inside the ball cage with a cotton swab moistened lightly
with isopropyl alcohol.
5
Recenter the rollers in their channels, as needed. Ensure that fluff from
the swab is not left on the rollers.
6
Replace the ball and retainer ring, and then turn the retainer ring clockwise
until it clicks into place.
30 Quick Reference Guide
