Gorenje RC4180AW: Changing the Direction of Opening the Door

Changing the Direction of Opening the Door

Appliances without cover

of hair drier, for example) and lightly

stretched to the required height. In certain

If you find the direction of opening the door on

models it is not possible to replace the door

your appliance inconvenient, you can change

gasket.

it. Holes on the opposite side have already

been prepared in the factory and are now

plugged.

• Remove the cover on the upper hinge,

unscrew the hinge and take off the upper

door (the door is not fixed on the middle

hinge), don't forget to remove the washer

from the middle hinge.

• Unscrew the lower hinge with foot and

remove the lower door.

• Unscrew the middle hinge and the other foot.

• On both doors, insert a door plug into the

door hinge slot and vice versa.

• Fix the lower hinge with foot to the opposite

side and fix the other foot on the place where

previously was the hinge.

• Put the lower door on the lower hinge.

• Rotate the middle hinge for 180°, replace it

to the opposite side of the door and fix it.

• Put on the washer first and then the upper

door.

• Fix the upper hinge and cover it.

• Unscrew the handles and replace them to

the opposite side (not for handles mouinted

horizontally). Some screws are covered with

caps. Take them off before undoing the

1 Cover for the upper hinge

screws.

2 Upper hinge

• Plug the remaining holes with decorative

3 Middle hinge

caps.

4 Washer

• Check the gasket, it shouldn't be creased

5 Lower hinge with foot

and it should seal well. In case it does not fit

6 Washer

perfectly, pull it out and rotate for 180°.

7 Foot

• Should the seal not adhere to the casing of

8 Handle

the appliance perfectly, it will have to be

9 Door hinge

heated from a suitable distance (by means

10 Door plug

Appliances with cover

• Unscrew the other foot and attach it to the

slot where the footed hinge was previously

If you find the direction of opening the door

installed.

on your appliance inconvenient, you can

• Unscrew the plug functioning as the upper

change it.

hinge and attach it to the opposite side of

• Unscrew the lower footed hinge and remove

the appliance.

the lower door.

• On both doors, attach a door plug to the

• Then, unscrew the middle hinge and remove

door hinge slot and vice versa.

the upper door.

Instructions for Use10