Dell Latitude XT: When to Use the Dell Diagnostics Starting the Dell Diagnostics From Your Hard Drive

When to Use the Dell Diagnostics

If you experience a problem with your Tablet-PC, perform the checks in

Lockups and Software Problems (see "Lockups and Software Problems" on

page 23), and run the Dell Diagnostics before you contact Dell for technical

assistance.

It is recommended that you print these procedures before you begin.

See “Using the System Setup Program” in your User’s Guide to review your

Tablet-PC’s configuration information, and ensure that the device that you

want to test displays in the system setup program and is active.

Start the Dell Diagnostics from your hard drive or from the Drivers and

Utilities media.

NOTE: The Drivers and Utilities media is optional and may not ship with your

Tablet-PC.

Starting the Dell Diagnostics From Your Hard Drive

The Dell Diagnostics is located on a hidden diagnostic utility partition on

your hard drive.

NOTE: If your Tablet-PC does not display a screen image, contact Dell (see

“Contacting Dell” in your User’s Guide).

NOTE: If the Tablet-PC is connected to a docking device (docked), undock it. See

“Undocking Your Tablet-PC From the Media Base” and “Undocking Your Tablet-PC

From the Battery Slice” in your User’s Guide for instructions if applicable.

1

Ensure that the Tablet-PC is connected to an electrical outlet that is

known to be working properly.

2

Turn on (or restart) your Tablet-PC.

3

Start the Dell Diagnostics in one of the following two ways:

NOTE: If you wait too long and the operating system logo appears, continue

®

®

to wait until you see the Microsoft

Windows

desktop; then, shut down your

Tablet-PC and try again.

– When the DELL™ logo appears, press <F12> immediately. Select

Diagnostics

from the boot menu and press <Enter>.

NOTE: Before attempting the following option, the Tablet-PC must be

powered down completely.

– Press and hold the <Fn> key while powering the Tablet-PC on.

26 Quick Reference Guide